Snatch
Member
Thank youLeave this with me. I will test on my bike this week to adjust
Thank youLeave this with me. I will test on my bike this week to adjust
Ios or Android?I can confirm the speedo does not work....set the Levociraptor on 3, in Blevo changed the multiplier to 1,5 and left the wheel unchanged at 2240 (27,5 inch wheel) the shown speed figures are too low probably around 10-15kmh
iPhoneIos or Android?
Could you share the bike setup screenshot?
Sorry, I saw 3 screenshots and I don't understand the meaning.. first of all the wheel size must be the real wheel size. So the first screenshot is wrong.iPhone
Thank you for your custom. Stock arriving shortly for dispatch. Your order status will be updated as soon as dispatched.MORNING ALL I HAVE ORDER MINE HOW LONG DID YOU WAIT TO GET IN POST I ORDERD MY SUNDAY AND STILL NOT TURNED UP CANT WAIT TO TRY TO MY 2019 LEVO
What about the 100kg muppet riding the bike? Lots of energy there to take out the bigger muppet walking up the bike trail..Always good to see innovation, as one thing always leads to another, your only got to look at F1 and the modern car industry. Think the speed thing is a bit of a issue on the trails but a 20KG bike at 15MPH is going to leave a mark on anyone Walking UP a clearly marked Bike tail (yep it happened to me) . Suppose it's going to happen with the uptake of Ebike's sooner or later. So i guess what i'm saying is i'd rather be on a Legal bike when it goes to court that one that's been altered.
The speed multiplier adjust the speed only in BLEvo.. all the Ant+ data are wrongPaolo, maybe we do not understand this correctly. Let me explain from the beginning. I installed the Levociraptor set the dial to 3 which means according to the Levociraptor manual a circumference setting of 1333 and a top limiter speed of 43kmh. Now my understanding is that the specialized Motor gives out speed readings over ANT+, so if I connect my Garmin Edge 830 and connect to the Kenevo Motor, I get the Speed Reading from the Motor. Now this speed reading is obviously too low as I am on 1333mm wheel circumference. Now comes the important part of my understanding (and this goes as well to TRAILWATTS) I sought that when setting in Blevo the speed multiplier to 1,5 and the the real wheel circumference (for 27,5 around 2220mm) it would "trick" the engine in displaying the right speed over ANT+ and onto the Garmin Display? Maybe I got this wrong and a 1x5 setting in Blevo only means I can see the real speed in BlLevo App but the ANT+ speed output stays at an equivalent 1333mm when (approx. 10-15 kmh too low) This would mean that all connected ANT speed displays which get the speed from the Motor do not display the "right" speed at which I am going but the 1333mm speed.
And not all countries have those rules......Thats not really the subject of this tread shandy, if you want open one with „pro & cons“ of Tuning emtbs, but I get really tired of people hijacking Threads with „oh you shouldn’t do this or that“
The firmware version you have has not been tested. You are welcome to purchase and test. If unsuccessful then you can return for refund?I've spoken to Trailwatts and they have confirmed to me that this will not work on my 2020 Kenevo after I let them know my firmware details, yet othesr on here have fitted this to their 2020 Kenevos. I was unaware that on such a new bike that there would be different firmwares
Please can you share your software version to help others.I am pretty sure it will work, I habe a 2020 kenevo expert with an firmware which is not on the list, levociraptor works like a charm
The World's largest electric mountain bike community.