Search results

Tons of threads on long stroking rear shock on Rails. Pretty much every thread that discusses rear shocks on Rails has info about guys running longer stroke shocks. Fitment all depends on shock choice due to reservoir size for down tube clearance and the seat stay bridges clearance from the...

Did they send the wrong hardware? I installed the same offset bushings kit and DHX2 shock. Removed the white pressed in the black DU bushings inserted the pin + sleeves, then used the Trek 10mm Shock axle/bolt to tighten it all up. Curious as to why it didn't work. At least you found a way...

They are the right size but you had to remove the off-White plastic bushing off of the fox shock for them to fit....

I just run A fox SLS 700lb spring

Or I have the tools to remove the Igus Bushings and install the DU bushings to make the offset hardware fit properly

If you make it out to Cali I've got the extra hardware if your lost set doesn't ever turn up.

So u had to file down the silver sleeves because u used the IGUS bushing instead of the DU bushings from the offset kit. Looks great!

Factory Size is Metric, 230x57.5. Your shock is a Trek Specific Trunnion version...230mm eye 2 eye shocks are not normally trunnion mount. You can try a longer stroke shock to gain travel, but if your not familiar with doing it, I wouldn't recommend it. You'll also need all new shock hardware...

I don't need a hardwired light. I run a Niterider 4200 Enduro on the Bars and a Light & Motion SECA 2500 on my Helmet.....All I need to light up the night sky all night.

Looks like a damaged stanchion in one of the pics.

I ended up Riding Tam Yesterday, I started from Glen Dr. I just started using Komoot but typically use Strava to record my regular and now eMTB rides.

Axle to Crown with the fork at 190 is only 4mm taller than my Fox 38 170mm.... 588mm vs 584mm. Zeb 170 A2C is 586mm

To use The Offsetbushing hardware you have to remove the Fox white IGUS Bushings and insert the black DU bushings from the kit. then press the 54mm long piece thru the top bushing and then the sleeves over each end....repeat for lower. The hardware from thelostco.com shop I sent u the link for...

Did you ride in to the City from Marin

Sweet ride? Fox 40? Now that's an interesting setup. What travel on ur fork and rear shock?

NVM...36's are 180 post mount... This is what you need..... Shimano Post Mount Brake Adaptor

Didn't you have a adapter on ur last fork?\

I already had the kiox upgrade so installation was simple. Cables from the Kiox and Nyon are the same so all I had to do is swap the 4-pin cable that attaches to the motor from the kiox mount to the Nyon mount.

Bosch Nyon Aftermarket Kit for my Rail 7

That Rev Stem has the recess for the knock block spacer underneath it?