Search results

  1. Darren66

    Cube TOURING HYBRID EXC 625 2021 has Bosch Generation 3 engine?

    You could also check out the Hybrid pro 625 all road, this has the CX Performance gen 4 motor and its a similar price.
  2. Darren66

    Who do I believe....Bosch Purion or Garmin?

    You think a car speedo is accurate ?
  3. Darren66

    Cube Deristricted

    I had a Speedbox 3.0 fitted for 900 miles and now a Volspeed V3 for over 300 miles, no issues with either...
  4. Darren66

    Speedbox (Or similar)

    I used a Speedbox 3.0 for approx 900 miles and now a Volspeed V3 for 300, no problem with either.
  5. Darren66

    Lights, what have you bought/ recommend

    I fitted one of these, great performance and only around £60.
  6. Darren66

    Anyone derestricted the new Shimano EP8 yet?

    Sorry, thought I'd be the first to get in there...:)
  7. Darren66

    FreeHub Body attached to cassette

    To be honest, it may not be as bad as the photo. You'll need to clamp the freehub body in a vice using soft jaws, so as not to damage it further, and using a chainwhip, apply pressure anticlockwise to each sprocket, it will be the larger ones that have caused the damage as these exert more...
  8. Darren66

    FreeHub Body attached to cassette

    Unfortunately, in time the steel cassette will eat into an aluminium freehub body.
  9. Darren66

    Pedal fitting, washer or not?

    If the pedal axle has a flange, like these Stamp pedals, then no need.
  10. Darren66

    Bosch Gen4 gets more power, is faster than Turbo Levo in drag race

    Pedal Power or 50 cycles in Loughborough
  11. Darren66

    Speedbox 3 and Bosch Gen4 after update to 1.04

    I wouldn't worry about it, I have dynamic mode switched on, and I can't tell a difference as I find the gen 4 motor doesn't shut down abruptly anyway.
  12. Darren66

    Speedbox 3 and Bosch Gen4 after update to 1.04

    You need to be moving to set dynamic mode. Press walk button then + button briefly
  13. Darren66

    Speedbox 3 and Bosch Gen4 after update to 1.04

    You need to be moving to set dynamic mode.
  14. Darren66

    Volspeed installation

    You should be able to access the motor from the left side, the dark torx bolts hold the motor to the frame. upload a photo of the motor.
  15. Darren66

    Volspeed tuning box for Bosch gen 4

    Take these readings with a massive pinch of salt... I've had the range read as high as 220 miles and the battery % stays in the low 50's, even with a full battery :oops:
  16. Darren66

    Speedbox

    Speedbox 3.0 is the latest version and good for 2014 on.
  17. Darren66

    Volspeed tuning box for Bosch gen 4

    Although you can put the Volspeed into "workshop" mode to allow software updates, I'd recommend removing it for the update and then refitting.
  18. Darren66

    Volspeed tuning box for Bosch gen 4

    Is there any evidence to prove that a lower max speed, 35kph/21mph makes a difference when trying to avoid error codes with the Volspeed V3, or is it more the fact that someone reported no issues after many miles and just happened to have a lower max speed setting, maybe just coincidence? When I...
  19. Darren66

    Petition to raise UK ebike limit to match the USA 20mph.

    Yes, that was my point... On my non-e road bike, I tend to cruise between 17-20mph, the max speed like all bikes, including (pedal assist) ebikes is dictated by gearing and the riders ability to push a high gear, I personally don't believe there should be any speed limit on pedal assisted...
Top