Search results

I don't use the chain guide, I never had a problem without it as long as you use narrow-wide chainrings ;)

Yes, you just need to upgrade to latest (but if you changed the region, change it again before updating)

No, they are not, they have different size and mounting holes just as Anfos has explained. You can change PW-X with PW-X2, exact same design.

Thats is only for e8000. many of us have downgraded to 4.0.2 and we are very happy (it is a completely new bike after that)

What's the weight of the 540wh battery? I am guessing is almost the same... can we upgrade our carbon model? that would be just awesome :D

My cable was long enough to install the display on the right side… straigth to the display together with the handlebar :)

It is not the same to ride at 60nm with two so different weights... It is also different to ride 60nm and a lighter bike compared to 80nm and a heavier bike. Very different feelings there...

That's awesome! I was able to set to 85nm only after downgrading to 4.0.2 then upgrading again to 4.1.6

I don't think so. Maximum recommended is 29 x 2.5 but I think I saw someone who was able to fit a 27.5 x 2.60 max

You don't need to take almost nothing apart to connect the cable. Just disconnect the remote assist level controller and connect the original shimano cable. Anyway you don't need to use the shimano cable. You can just downgrade to 4.0.2 and unlock the max speed using bluetooth, then upgrade...

Not yet... tomorrow I will.

Hi! I got my 625wh battery replaced recently and when charging in the bike, the charger never ends. It is always blinking green. After 5-6 hours I disconnect it and it is always somewhere between 95% and 99% (never 100%). I have tried once to charge it outside the bike and it reached fixed...

I think it is not the same on every bike. I removed the fork some time ago, and the "bundle" was just at the top of the tube, very close to the fork. I could see it when removing the tube, and it even move past the fork hole close to the exit ;)

Yes, the problem is that sometimes the original ad305 cable gets stuck, but it is long enough and should be the same for all. If it reaches the ew100 it should reach the sc-e7000, but do it, drop the fork and try move the cable. The only problem is that normally it is not stuck at the fork, but...

Hi! That's the "normal" noise when engaging the motor. It is louder on the pw-x3, but it is present in pw-x and pw-x2 as well as other manufacturers. Some sounds higher than others. I think you don't have to worry, just watch it over time, you have plenty of warranty yet ;) Cheers from Spain!

Orbea has said that this bike CANNOT be used without the internal battery, as it is part of the frame. I mean that the battery is required to ensure the structure integrity of the frame. No warranty claim is valid if the frame breaks for using it without the battery.

Be sure to search for the display within 15 seconds from switching on, or push any button on the remote to activate BT for another 15 secs.

Cycles are not working, but health is... Don't know how to check the extender health... I don't even know if it is taken into account when connected and using the ST app :D

Thanks for all your comments. Based on the symptoms... what would you think the problem is? (it shuts down when requiring some constant power). It is not directly related to temperature because sometimes it just shuts down after some meters from cool.

Thanks for your answer. I am sorry I did not give you enough details. I already tested other batteries, they have worked all perfectly, no matter the temperature nor the assistance levels. The battery was tested at the lbs, showing no fault at the diagnosis. This same battery failed in another...