Search results

@vadII iOS version working fine, max W changed and it was stored correctly and affected the output. Still some vibrations on ep8-rs when setting to >350W and battery <50% but I think this is a battery or motor limitation. thanks!

I also have the carbon one, and I know some other users has suffered from the vibration too... I am not sure on what depends. It happens also with the extender. Maybe a faulty motor or something loose... Whenever I revert to 350W max the vibration dissapears for all modes.

Yeah, they cannot be reached with the in-built battery, no without troubles. I just tried that on mine, 500W and 85nm and indeed there is a huge difference in assistance level, but you will get weird vibrations when battery level is below 50%... not recommended at all!

https://apkcombo.com/e-tube-project-cyclist/com.shimano.etubeprojectmobile.droid.phone/download/phone-5.0.2-apk

No you dont need additional files there. I have only those two and it is working. Just be sure you have etube 5.0.2 or older. however mine were 5.0.0 and 5.0.2 not 9.x.x

I am not sure about downgrading but that could mean that it will detect if the motor output (in W) or torque has not the default values also... Edited: Yes, it has been confirmed that you cannot downgrade (yet) with the latest e-tube app. You have to install an old version.

Thanks for this picture! I have just ordered a dropper seatpost for my fathom e+2 pro 2019... Can you please tell me more about the routing needed for the fathom? Did you need to pass the cable under the motor? Same screws removal? Thanks!!!!

Hi! Yes, after some more testing, it is all battery related. There is too much drain from the motor when >350W. That's why Orbea limited boost setting to 350W. When the battery is full, you can use 400W-450W without problems, but as you reach 50% or less you start noticing some vibrations. I...

Unless you downgrade to 4.0.2 and use stunlocker or similar to update wheel circumference ;) Or you can bring the bike to the lbs and they will update the circumference settings

I tried several times... even after restarting... Can you upload an iOS version as well? I bought both some time ago :D

I have just tried but it gets stuck on 0% when trying to update:

Not available yet on store... I will check it periodically, thanks.

Nice, I will try it and will let you know if it works. Thanks!

They are available for "free", you only have to pay 1$ to download the app. I have no problem paying for the stunlocker premium license. I do not need to change the region but the ability to change the max torque and power settings is very useful. One other thing is that stunlocker allowed me...

Please take a look at the attached picture, you can see the modified values from emax:

My firmware is 4.1.7 and I although it appears the edit button on the torque/power settings it cannot be pressed so I cannot acess the "other settings" screen :(

Mmm, I just tested this on emax on my orbea rise and they were changed, and it did make a difference. After changing these params the new values appeared also on the stunlocker app (250,350,500W). However when setting to 500W and 85nm the motor were doing some bad vibrations when battery < 30%...

Ok, thank you! Why does emax mobile app allow this? Cheers

Hi! Today I tried to change power output values on ep8 rs motor (settings activated) but there is no edit button. Is this a premium license option only? Thanks!

Did you notice motor vibrations? Specially when low battery, when I set 500W and 85nm I notice lot of vibrations coming from motor, probably because not enough battery output power... Vibrations dissapear when resetting to 350w... Thanks.