Will blevo always show the correct total distance of the motor? Or will it only start tracking correct distance from the day I bought blevo?Yes..
The total KM stored in the motor will be wrong, but BLEvo will report the correct value.
Will blevo always show the correct total distance of the motor? Or will it only start tracking correct distance from the day I bought blevo?Yes..
The total KM stored in the motor will be wrong, but BLEvo will report the correct value.
The total distance is stored in the motor, not in the App. If the the speed is hacked this value is wrong. What BLEvo does is to adjust this value in function the speed hacked, but can be wrong because it depends from when the speed was hacked..Will blevo always show the correct total distance of the motor? Or will it only start tracking correct distance from the day I bought blevo?
It is already in the TODO list..@PaoloBLEvo is it possible to add acceleration adjust and shuttle mode to eco trail and turbo modes so they can be adjusted differently for each mode?
Okay, I thought that was the case then.The total distance is stored in the motor, not in the App. If the the speed is hacked this value is wrong. What BLEvo does is to adjust this value in function the speed hacked, but can be wrong because it depends from when the speed was hacked..
The new version of BLEvo 3.3.3 for iOS is available on the Apple Store. I implemented the navigator functionality through WayPoints.
Look at the following video in which I explain how to do:
The video is in Italian, but you can use the subtitle functionality of Youtube.
These are all the news:
- Now the automatic pause resumes only if the speed is greater than 2km / h
- Added on the Marker map with the name specified in the GPX
- Added on the map Waypoints specified in the GPX
- Added voice message when you are near a waypoint or Marker with name
- Now you can remove GPX files
- Now the display of the battery status in the map is green if charged and red if it is discharged
- Bugfix: now when BLEvo starts, it does not disable any active audio player
- Bugfix: now even with the screen off, the recording will continue
- Bugfix: now the GPS service is stopped correctly
Enjoy your ride
Previous post was just a joke Paolo!Hi Paolo,
Thanks for all the updates!
I watched the video and via auto translate I understood about 70%. I think I only missed the part where you imported all my my tinder matches as waypoints? My wife will going to miss me for long time this summer.
View attachment 9522
It is already in the TODO list..
we all live in the us ?Sorry, the message is referred only to not US guys. I will change the message. Until now I'm not able to understand if the bike is from US or not... Could you post the Battery Monitor screen shot?
Thanks.
Thanks for the feedback.Thank you for the audio fix! A little thing but really nice.
Yes you get correct tracking when you use BLEvo and change speed limit.Paolo, are you saying that with the speed hack in place on the MC app, we can still get correct tracking using the BLEVO app from wheel circumference ?
I bought BLEVO back in Oct 2018 when I bought my 2019 Expert. I believe the speed hack was applied through the MC app by setting wheel circumference to 800, this was done by a third party.
At present I don’t use either MC or BLEVO as I didn’t think with the speed hack in place they work accurately?
I’m am now using an app called Endomondo for tracking all my rides via GPS tracking. But I’d like to use BLEVO with the HR system for FAT burning by automatically adjusting motor assistance according to my live heart rate. When I used this HR system in BLEVO back in Oct I didn’t find it worked at all well?
i know i’m not very digital, but i cannot figure out how to bring up the english subtitles on paolo’s youtube vids. i can only get italian subtitles. any suggestions? have you guys been able to do this?
i know i’m not very digital, but i cannot figure out how to bring up the english subtitles on paolo’s youtube vids. i can only get italian subtitles. any suggestions? have you guys been able to do this?
Thank you, Paolo. I apologize for not making myself clear.In the Levo 2019, the acceleration is totaly different. You can have a percentage from 0 to 100% with BLEvo...
And I don't remember if the TCU 2.019 handles correctly this value...
It this what you want to know?
Sorry but I don't have the Levo 2019, and I cannot compare the 2 acceleration system. Maybe someone already did this comparison.Thank you, Paolo. I apologize for not making myself clear.
Is BLEvo “100% Acceleration” on the 2019 Levo the same as “Race Acceleration” on the 2018 Levo with firmware v. 2.22.x?
Or, is BLEvo “100% Acceleration” on the 2019 Levo the same as the default acceleration on the 2018 Levo with firmware v. 2.23.x using Mission Control?
(I believe this default value is equivalent to “Eco Acceleration” on earlier firmware versions.)
Basically, what I want to know is whether I will be able to set the Acceleration on the 2019 Levo to give the same rapid responsiveness as when I set Acceleration to “Race” in Mission Control with v. 2.22 or to “Power” using BLEvo with v. 2.22 on my 2018 Levo.
If it ever stops raining here in “sunny” Southern California I hope to be able to test ride the 2019 Levo and compare Acceleration and responsiveness with my 2018 Levo. I really like the tunability of v. 2.22 with BLEvo, and I am hesitant to give that up.
weather has been terrible here in cali. will have some feedback for you after this weekend for sure.Hi BLEvo guys, are you riding with BLEvo and the new navigation system? What you think? Are there some improvements to do? For sure, yes... let me know..
It seems to be working good Paolo!Hi BLEvo guys, are you riding with BLEvo and the new navigation system? What you think? Are there some improvements to do? For sure, yes... let me know..
Thanks, but the navigator system is another thing.. it is the map shown during the ride where you are able to follow a GPX with the waypoints used for navigation indication.. what you are talking is the map of the tour after the ride... if I understood well..It
It seems to be working good Paolo!
I like how you can "play" your route and see how the bike performed throughout your ride.
Excellent work maestro!!
The total mileage is stored in the motor and if the speed limit is hacked, the value will be wrong.. but during the ride, BLEvo will show the right values... speed and km..Sorry to bother, I know you said that the mileage on the MOTOR in mission control is not right if speed is hacked. So do I need to limit it to 25kmh to get it right or just have the right circumference set in BLevo? Also, does blevo track total mileage since downloading it?
Hi Paolo, thanks for the reply. I understand this point from a previous question. I was wondering whether Blevo tracks your "new" total distance somewhere? I know it tracks your distance per ride but is there a total counter somewhere?The total mileage is stored in the motor and if the speed limit is hacked, the value will be wrong.. but during the ride, BLEvo will show the right values... speed and km..
No.. the total counter is not present in BLEvo.. I don't want to add it because it could be wrong.. it is better to use Strava for tracking the total km..Hi Paolo, thanks for the reply. I understand this point from a previous question. I was wondering whether Blevo tracks your "new" total distance somewhere? I know it tracks your distance per ride but is there a total counter somewhere?
The World's largest electric mountain bike community.