Zebs

Asnowmobiler

Member
May 1, 2021
52
18
Jim Thorpe Pennsylvania
I upgraded my Yari to the Charger 2.1 in 170 and liked the stability it gave but I was getting more pedal strikes. I've since moved the link to the high position and really liking my current setup other than the flex of the fork. I weigh about 280 right now, so I know I'm stressing everything more than most, so I'll likely upgrade to the Zep Ultimate or Fox Factory 38 sooner than later and I will get a 170 from the start.
 

Doomanic

🛠️Wrecker🛠️
Patreon
Founding Member
Jan 21, 2018
8,729
10,395
UK
How are you attributing more pedal strikes to longer forks?
 

Doomanic

🛠️Wrecker🛠️
Patreon
Founding Member
Jan 21, 2018
8,729
10,395
UK
Except it doesn't. It lifts the front, slackening the head and seat angle but raising the BB (very) slightly. You get the extra travel from longer forks, not deeper insertion..
 

Doomanic

🛠️Wrecker🛠️
Patreon
Founding Member
Jan 21, 2018
8,729
10,395
UK
Are you running the forks softer now, with more sag?
 

Doomanic

🛠️Wrecker🛠️
Patreon
Founding Member
Jan 21, 2018
8,729
10,395
UK
Perhaps you are hitting stuff harder and consequently sitting deeper in the travel, given the increased confidence the better forks will bestow.
 

John B

New Member
Nov 25, 2020
26
121
Folkestone
I have 170mm Zebs on my rail but I have also increased the rear travel to 161 with a fox Dhx2 as I did not like having 20mm more on the front than the rear. Felt unbalanced. Would highly recommend the coil shock tho, transformed the bike!
 

ckkone

Member
May 21, 2021
12
6
UTAH USA
I have 170mm Zebs on my rail but I have also increased the rear travel to 161 with a fox Dhx2 as I did not like having 20mm more on the front than the rear. Felt unbalanced. Would highly recommend the coil shock tho, transformed the bike!

So you using a 230x60 or 230x65 Fox DHX2?
 

Black8917

Member
Jun 17, 2021
34
11
PNW
I hate mine. Trek rail 9.8 with zeb select. Upgraded it to RC2 2.1 damper so it’s an ultimate now. 170 air spring Refreshed the lowers. Even installed a smash pot tried 3 different springs. It’s better but pales in comparison to my fox 38. It’s paired with a fox 2021 dhx2 165mm with progressive spring.
Both low and high speed compression is backed out completely and it still makes my hands numb on small chatter.
Going to change the internal oil to a lighter weight and see if that helps.

I jump on my other bike with fox38 and it’s night and day better.
 

Stray cat

Well-known member
Aug 24, 2018
189
143
On the trails
Zeb Ultimate here and I’m not entirely convinced. I have tried different settings and finally running it without tokens and 100 psi for 210 lb rider weight. Not bottoming out but I am not happy with mid support.
Despite running the new Debonair C1 ,fork sinks 1 centimetre or so
I have had Fox 36 Grip2 and in my opinion is superior and the 38 must be even better
 

slomtbr

Active member
Subscriber
May 14, 2021
130
99
US
I hate mine. Trek rail 9.8 with zeb select. Upgraded it to RC2 2.1 damper so it’s an ultimate now. 170 air spring Refreshed the lowers. Even installed a smash pot tried 3 different springs. It’s better but pales in comparison to my fox 38. It’s paired with a fox 2021 dhx2 165mm with progressive spring.
Both low and high speed compression is backed out completely and it still makes my hands numb on small chatter.
Going to change the internal oil to a lighter weight and see if that helps.

I jump on my other bike with fox38 and it’s night and day better.
Try slowing your rebound setting. If the fork rebounds too quickly, it will add to the harshness on small bumps.
I'd start with 2 clicks from closed, and go to 3 or 4 if it packs up.
 

EMTB Forums

Since 2018

The World's largest electric mountain bike community.

555K
Messages
28,051
Members
Join Our Community

Latest articles


Top