Gutch
Active member
I wish the would have left more steerer tube length. I’m still trimming cables. Also, had to do all updates on E-TUBE.
YT Decoy availability pushed back one week to Oct. 9
- Thread starter Crash
- Start date
That’s a beautiful bike ??
So are you changing to 32 tooth Renthal chainring immediately?
Gutch
Active member
Yes, already done. Stuck on build awaiting SRAM bleed tool.
NOTE: make sure your Renthal chainring is lined up perfectly before bolt down. The shimano ring is flat around the holes and seats perfectly on the spider, the Renthal is not. We’ll see if it can take the abuse without that “extra” strength of the design.
Also, my limiter screws were not touched on the rear derailleur. It would not go into the smallest cog, until I adjusted it.
Motor and display needs updates.
Dropper cable is WAAY long, but understood for different heights.
The race face dropper lever will mate with Sram matchmaker, but sits a tad high for my liking.
Dumb question.. what’s up with this torque wrench? How do you use it? I have other ratchets that I used to check everything, but this boggled my mind, maybe it was the beer last night?!!
Also, bike ships in low mode, switched to HIGH with a Maxxis DD Aggressor 2.5 on back. Don’t care for the fat tire on the back. Too bouncy like my Levo was and slow. I see Specialized has gone to skinnier rear tires for 2020.
My bike is named Mr.T! More gold than I can afford!!
NOTE: make sure your Renthal chainring is lined up perfectly before bolt down. The shimano ring is flat around the holes and seats perfectly on the spider, the Renthal is not. We’ll see if it can take the abuse without that “extra” strength of the design.
Also, my limiter screws were not touched on the rear derailleur. It would not go into the smallest cog, until I adjusted it.
Motor and display needs updates.
Dropper cable is WAAY long, but understood for different heights.
The race face dropper lever will mate with Sram matchmaker, but sits a tad high for my liking.
Dumb question.. what’s up with this torque wrench? How do you use it? I have other ratchets that I used to check everything, but this boggled my mind, maybe it was the beer last night?!!
Also, bike ships in low mode, switched to HIGH with a Maxxis DD Aggressor 2.5 on back. Don’t care for the fat tire on the back. Too bouncy like my Levo was and slow. I see Specialized has gone to skinnier rear tires for 2020.
My bike is named Mr.T! More gold than I can afford!!
Camstyn
Well-known member
It’s not Mr T until you put a KMC gold chain on it
Gutch
Active member
I have one, but I’m afraid he’s too strong and will snap it!!
Nah I doubt it, haven’t heard of snapped chains unless it’s worn!
06z
Active member
Were you able to use the stock chain guide with the Renthal 32? Also curious if the top speed is affected with DI2 and the 32.
My brother and I both installed a 220 on the front. We went with the organic pads as the metallic pads destroyed our rotors. Grooves in them and squeeking like a houling banshee. Now they are smooth, quiet and excellent modulation.
Camstyn
Well-known member
The Decoy already comes with a 34t.
Gutch
Active member
Gutch
Active member
What’s the shifter for? You may want the other side instead.? I did the same thing, gathered all goodies awaiting arrival.
its a E8000 shifter im not a fan of the E7000 buttons i had it on my last shimano bike
Gutch
Active member
Yes, I know. Are you going to shift with it? I did the same thing. You need a right hand side.
no its for the motor not for the Di2
Gutch
Active member
Gotcha, are you sure it won’t mess with your dropper lever?
Camstyn
Well-known member
Why the spare shock, is it revalved or something?
it'll mess with the dropper a little but ill survive.
I ordered the PRO because iv had bad experiences with carbon wheels and also I don't want Di2
Gutch
Active member
Cool, enjoy!
jabberwocky
Member
You need to open the eTube app, have it ready to connect and then turn the bike on. Theres a short window where it should appear as a connection option in the app as the bike boots up.
Gutch
Active member
Exactly, there is no Bluetooth display on the E7000.
Crash
Member
- Thread starter
- #58
Thanks Jabberwocky and Gutch. It worked.
Updated my firmware but still get W013 (torque sensor) error occasionally. When I get the error, I turn it off and back on again until it goes away. I have just 75 miles on the motor so far—concerned this is just the start of bigger problems yet to come.
Last edited:
Gutch
Active member
You’ll get that error sometimes if you pedal without the bike on.
KenX
E*POWAH Master
Yes, don't put feet on the pedals as the system's booting up or you'll get the error code and have to turn off and on again.....
EMTB Forums
Latest articles
-
Bosch-powered Merida is here – the eOne-Sixty SL and eOne-Eighty intro and test
Merida has used Bosch-motors for years, but not on the emtbs. The full...- Knut Nes
- 10 min read
- Views: 3K
- Reaction score: 5
- Comments: 7
-
Bosch ABS Pro and Trail Pro - an interview about the new ABS profiles
When testing the new Bosch Performance CX gen5, we were also introduced...- Knut Nes
- 2 min read
- Views: 5K
- Reaction score: 2
- Comments: 5