Pivot
E*POWAH Master
Thread on what we want, rather than what have we bought ;-)
What I want to buy for my eMTB
- Thread starter Pivot
- Start date
You can get the water bottles cases, they have a screw off top and you can stick your stuff in. Also, the water bottle cases with a zip round the edge where you can do the same - more accessible but less water/mud proof.
like this :
Z BOX L - Bike tool holder box
The Z Box L is a large-capacity, double-compartment tool holder that lets you easily store your gear. Waterproof, it keeps your gear dry.
www.zefal.com
You can also get a twin bottle cage mount to mount them side by side, so one for tools and one for water.
Pivot
E*POWAH Master
- Thread starter
- #4
You can get the water bottles cases, they have a screw off top and you can stick your stuff in. Also, the water bottle cases with a zip round the edge where you can do the same - more accessible but less water/mud proof.
like this :
Z BOX L - Bike tool holder box
The Z Box L is a large-capacity, double-compartment tool holder that lets you easily store your gear. Waterproof, it keeps your gear dry.
You can also get a twin bottle cage mount to mount them side by side, so one for tools and one for water.
Very cool, thanks ZF for the reference!
alexbeck175
Active member
Someone to make a better mount for the nyon 2.0
Thankfully I've turned the mount around so it isn't like a rhino's horn.
Thankfully I've turned the mount around so it isn't like a rhino's horn.
EebStrider
Well-known member
Some way of making my Bosch motor quieter. Other than the noise, it’s absolutely flawless.
Invisible air-bags would boost my confidence. Really really big ones.
Wireless brakes that work.
An amplifier for my Bosch motor …I can’t hear it.?
Wireless brakes that work.
An amplifier for my Bosch motor …I can’t hear it.?
MrSimmo
E*POWAH Elite World Champion
- New tyres
- New lid
- and a new bike for the day after the warranty expires on the Levo and the motor catastrophically melts down in a hiss of angry rampant clutch/belt collapse!
- New lid
- and a new bike for the day after the warranty expires on the Levo and the motor catastrophically melts down in a hiss of angry rampant clutch/belt collapse!
I really don't neee anything for my emtb, but wireless shifting and dropper would be cool.
Instead I need something for riding:
- a new gps unit to replace a broken one, maybe Garmin 520plus/530
- what I really, really want and need are trousers for a tall rider at 6'3". Been looking for years with no luck and probably never will.
Instead I need something for riding:
- a new gps unit to replace a broken one, maybe Garmin 520plus/530
- what I really, really want and need are trousers for a tall rider at 6'3". Been looking for years with no luck and probably never will.
CBSTD
E*POWAH Master
Don’t need anything for the bike but the rider....lighterweight chassis, a back rebuild and a brain re-wire ?
EebStrider
Well-known member
Yeah, I’m a 32/33” waist, which is an Asian XL! ??
Pyr0
E*POWAH Master
Current wants are a 27.5 rear wheel and some 160mm forks (maybe lyrik ult.) so I can send my current forks for servicing/upgrades.
Maybe AXS sometime in the distant future.
I keep thinking about some Magura calipers too with all the talk on the forum
Maybe AXS sometime in the distant future.
I keep thinking about some Magura calipers too with all the talk on the forum
Yeah so funny that some nations adult population isn't all fat isn't it?
Pigin
Well-known member
When I was HK I spied a shirt I fancied. I asked the sales person to show me the ones with 44” chest. They looked great and bought a couple only problem was the cuffs where half way up my forearm and I was on trend exposing my belly button. ?. I really should have tried them on first. ??
Last edited:
steve_sordy
Wedding Crasher
A DVO Topaz T3 for my Focus Jam2
www.pinkbike.com
DVO Topaz T3 Air Shock - Review - Pinkbike
Is DVO's Topaz T3 Air a viable alternative to other popular shocks in the all-mountain/enduro niche? We bolted this thing on and rode it for a season to find out.
Some new tools ...
@steve_sordy I can't find the original thread where we said about fixing ratchets .. but as some Muppet just managed to do some double destruction (extreme abuse of equipment) and broke their's I thought I'd take it apart and take a picture for you !
This is the bit where normally one or both pawl's ?!? just end up moving/dropping out of position. You just put them back in again and viola - it works. Takes 2 minutes.
As you can see, mine is now a free turning variety as I sheared the head - that bit shouldn't turn on it's own :
(and yes, I know, don't use torque wrenches to undo things .. this one was already relegated to none torque wrench use .. and now it's a little hammer - a little hammer that should click when you've boshed things with the correct force ! )
Amazingly, I was on a roll and then sheared an adaptor ...
@steve_sordy I can't find the original thread where we said about fixing ratchets .. but as some Muppet just managed to do some double destruction (extreme abuse of equipment) and broke their's I thought I'd take it apart and take a picture for you !
This is the bit where normally one or both pawl's ?!? just end up moving/dropping out of position. You just put them back in again and viola - it works. Takes 2 minutes.
As you can see, mine is now a free turning variety as I sheared the head - that bit shouldn't turn on it's own
:(and yes, I know, don't use torque wrenches to undo things .. this one was already relegated to none torque wrench use .. and now it's a little hammer - a little hammer that should click when you've boshed things with the correct force !
)Amazingly, I was on a roll and then sheared an adaptor ...
Last edited:
steve_sordy
Wedding Crasher
Thanks @Zimmerframe that might even motivate me to have a go at fixing my broken one. (Broken by trying to torque a left hand thread). It shouldn't be too bad as it wasn't a big thread - so no great force was used.
CBSTD
E*POWAH Master
Did you have porridge this morning ?Some new tools ...
@steve_sordy I can't find the original thread where we said about fixing ratchets .. but as some Muppet just managed to do some double destruction (extreme abuse of equipment) and broke their's I thought I'd take it apart and take a picture for you !
This is the bit where normally one or both pawl's ?!? just end up moving/dropping out of position. You just put them back in again and viola - it works. Takes 2 minutes.
View attachment 57657
As you can see, mine is now a free turning variety as I sheared the head - that bit shouldn't turn on it's own
(and yes, I know, don't use torque wrenches to undo things .. this one was already relegated to none torque wrench use .. and now it's a little hammer)
View attachment 57658
Amazingly, I was on a roll and then sheared an adaptor ...
View attachment 57659
EebStrider
Well-known member
How do you define fat?
EebStrider
Well-known member
No. How do YOU define fat?
Same as wikipedia
I just CBA typing it
I just CBA typing it
Visual images can help :
That was actually difficult getting a story link .. they were all blocked .. apparently the American's don't want anyone else seeing them ....
Not the story from the picture .. but the same story ?!! if you know what I mean .. or don't .. lets not get into wiki links for story ..
Couple recommits on cross-country journey
Trip started as declaration of romantic love leads couple closer to God.
eu.thenewsstar.com
Riding a bike *8.5 miles a day leads you closer to God.
Who knew?
*about a third of my daily commute. Imna have to buy a bus pass init
Who knew?
*about a third of my daily commute. Imna have to buy a bus pass init
One of these?
CBSTD
E*POWAH Master
The perfect tool for @Zimmerframe, as long as he doesn’t snap a track or something ?
Got one on my levo - luv it !!A DVO Topaz T3 for my Focus Jam2
DVO Topaz T3 Air Shock - Review - Pinkbike
Is DVO's Topaz T3 Air a viable alternative to other popular shocks in the all-mountain/enduro niche? We bolted this thing on and rode it for a season to find out.
Massively tuneable , if only I knew what I was doing ?
Similar threads
EMTB Forums
Latest articles
-
The most reliable motor brand (in Norway)
A poll was posted on a big Norwegian emtb facebook group. There are...- Knut Nes
- 3 min read
- Views: 774
- Reaction score: 4
- Comments: 2
-
2025 Canyon Spectral:ONfly CF Ltd review
We were quite surprised to read about the new lightweight Canyon...- Knut Nes
- 7 min read
- Views: 904
- Comments: 1