- Thread starter
- #31
There maybe some diy jobs about at owners expense?
Shimano EP8 Booster testing.
- Thread starter TrailwattsUK
- Start date
- Thread starter
- #34
Commencal Meta Power with 882wh?
Oh man! Youre killing me! Sooo clean. I have a ride in mind that i want to try but i just know ill be hike a bike for 1000ft vert at the top because im going to need a fair bit of boost to climb the 5500ft with my 540w battery. I want more W sooo bad right now. Decoy is tight but i would mount a strap on cage mount on the top tube for the climb but will this even work with an e8000? Does it fit a yt plug in recepticle? If yes on those can i get one in canada and how long would that generally take to ship?
Gutch
Active member
Looks tight! Where does it connect to? Sorry if naive, was thinking it would plug into the charge port.
- Thread starter
- #37
You cannot use charge port to exchange power. Trailwatts module has to be added to loom then refitted.
How soon before I can get one for my SC bullet?
- Thread starter
- #39
I’m fitting that model next week so we’ll see how it compares to fitting the Meta?
Gutch
Active member
Yes, 2 Bullits! Please
?? 3 Bullits
I'm intrigued by what you might come up with for an EP8 Heckler.
mandrews
Member
Same here!
@TrailwattsUK when will they be available for purchase and do you have to fit them? I presume they are spliced into the loom and not a plug and play?
?
?
- Thread starter
- #46
I have to attach module to lower battery harness with specific lengths etc to fit the frames and avoid crushing cables etc above the motor.
- Thread starter
- #48
You can remove the booster if range not required. £649.99 currently not charging for Labour etc
How many watts for £650?
- Thread starter
- #50
252wh pack, It’s not just the wh that makes the bikes range. The advantages of load sharing the batteries through the Trailwatts module also helps?
- Thread starter
- #51
The above pictures should give you all an idea as to fitment complexity and integrating the module whilst being able to remove and fit the motor and battery should it need replacing etc.
Gutch
Active member
Yikes, wish you were stateside! Gonna be a no go for us. Dang!
- Thread starter
- #53
My brother is in USA and will be able to assist in the near future.
Gutch
Active member
Cool!
Timochka69
Active member
I suppose you do not happen to have any relatives in Finland ?
- Thread starter
- #56
Unfortunately not.
- Thread starter
- #57
Bullit running 882wh with booster system.
Gutch
Active member
Looks pretty good! Couple questions for you.
-Can you take it off for a smaller ride? If so, where does the cord go?
-Is it pretty secure? As in rattle free?
-Does it work automatically, before or after your main battery expires?
-Does your battery bar display take this into account and hold bars longer?
-Lastly, is your warranty still valid?
Sorry so many, just need to clarify. A lot of consumers will ask these questions. Good job! First to market.
- Thread starter
- #59
You can remove the booster and tether cable with the strap to use waterbottle.
Trailwatts has been thrown around in enduro’s and extreme jumps for years by customers.
The system will drain both batteries under load sharing values. Your battery display will drop slower as invisible to bike.
As I am only altering the harness with no affect to the bikes electronics there should be no issues when motor/ factory battery need attention.
Any idea when you will be ready to sell it?
Similar threads
EMTB Forums
Latest articles
-
2025 M1 Sporttechnik EN 8.0 review
The M1 EN is one of four M1 models built on the same frame. Well, it’s... -
Bosch-powered Merida is here – the eOne-Sixty SL and eOne-Eighty intro and test
Merida has used Bosch-motors for years, but not on the emtbs. The full...- Knut Nes
- 10 min read
- Views: 5K
- Reaction score: 5
- Comments: 9