It’s worse than that, he’s dead Jim...

Doomanic

🛠️Wrecker🛠️
Patreon
Founding Member
Jan 21, 2018
8,770
10,469
UK
I think the main bearing has failed in my CX.
I’m having to take a half day on Wednesday to take it back to the shop and get it checked. Here’s hoping the warranty process won’t be too drawn out or painful.
 

Doomanic

🛠️Wrecker🛠️
Patreon
Founding Member
Jan 21, 2018
8,770
10,469
UK
Cheers. I’ve heard the warranty process is pretty easy, just hope it doesn’t take too long.
 

Doomanic

🛠️Wrecker🛠️
Patreon
Founding Member
Jan 21, 2018
8,770
10,469
UK
It's definitely dead. Bike is back with the supplying dealer who reckon it will be a 2-3 day turnaround. They are also servicing the bike because it looks like the rear hub has failed as well. :(
 
Last edited:

Topov

Active member
The Warranty process for Bosch has really improved now that Magura have taken over the claims process. All you need is original sales receipt and the claim will go through quickly, the longest part is usually for the motor to be posted. Shipping can cost about £60 but hey you get a new 2 years warranty aswell
 

Rob Rides EMTB

Administrator
Staff member
Subscriber
Jan 14, 2018
6,262
13,706
Surrey, UK
It's definitely dead. Bike is back with the supplying dealer who reckon it will be a 2-3 day turnaround. They are also servicing the bike because it looks like the rear hub has failed as well. :(
That’s a pretty good turn around. Sucks that its failed but good to get a new motor ?
 

Doomanic

🛠️Wrecker🛠️
Patreon
Founding Member
Jan 21, 2018
8,770
10,469
UK
It's definitely dead. Bike is back with the supplying dealer who reckon it will be a 2-3 day turnaround . :(
That’s a pretty good turn around.

So, 9 days later, I’m back from my brownie point earning trip to Barcelona for the wife’s birthday and my bike is...




...still bloody broken.

The bloke working on it is on his day off and hasn’t left any updates on the warranty paperwork. It’s not looking good for the weekend.

I’m bloody fuming. I’ll bet they would have fixed it ages ago if I was paying for it. ???
 

Topov

Active member
Doomanic

I am also waiting for a new bosch motor, the turn around is usually only a few days, but I believe last Monday was a Bank Holiday in Germany and everything fell behind. Still no excuse, I wanted to be out on mine the weekend too
 

ChrisP

New Member
Patreon
Founding Member
Jan 21, 2018
48
99
East Yorkshire
Same happened to me - both mine and wife's bike when he had Trek Powerflys. Took about two weeks to get the new motor. Neither bike had more than 400 miles on them. Must have been a duff batch of bearings
 

Doomanic

🛠️Wrecker🛠️
Patreon
Founding Member
Jan 21, 2018
8,770
10,469
UK
Apparently I should be getting the bike back next week. They are awaiting the delivery of the replacement motor (which has taken so long because of computer troubles so they couldn’t do a diagnostic report) but they are also waiting for a response from Trek about the rear hub, freewheel and frame bearings as they are all knackered too.
 

Doomanic

🛠️Wrecker🛠️
Patreon
Founding Member
Jan 21, 2018
8,770
10,469
UK
Yaaaay! It's done!

I missed a call earlier today and they were good enough to leave an answerphone message. The bike is ready to collect but no word on the damage to my wallet, hopefully it's all been warrantied...
 

Japuserid

Active member
Patreon
Founding Member
Jan 18, 2018
293
252
Cornwall, UK
I have heard that the problem with the CX drive side bearing failures is very likely caused by the build up of crud on the inside of the plastic motor cover, over time this gets slowly chewed up and is forced into the bearing, a bit like a meat grinder.

As every single CX owner I know (six now in total) has had a motor replaced, all except mine and my brothers Lapierre's that don't have covers on the drive side.

May well be something in this theory.
 

Doomanic

🛠️Wrecker🛠️
Patreon
Founding Member
Jan 21, 2018
8,770
10,469
UK
I think it's caused by the chain guard, I'll be dumping it on the replacement motor.
 

Doomanic

🛠️Wrecker🛠️
Patreon
Founding Member
Jan 21, 2018
8,770
10,469
UK
It liiiiives...[/maniacal laughter]

New motor fitted, along with rear wheel bearings and freehub, plus pads front and rear and a service. All for the cost of the pads.

I asked about greasing behind the seal and they seemed to think it wasn’t a user serviceable item... hmm...

For my own piece of mind I removed the drive side crank and popped the seal off.
IMG_3033.JPG

There’s more grease than the original motor but I still packed it out as per the instructions that came in the kit from Bosch.
 

Billy1mate

Member
Apr 17, 2019
29
23
Dorset
The Warranty process for Bosch has really improved now that Magura have taken over the claims process. All you need is original sales receipt and the claim will go through quickly, the longest part is usually for the motor to be posted. Shipping can cost about £60 but hey you get a new 2 years warranty aswell
You’d have thought the bike shops would have a couple of spares in stock then it’s only a phone call/email to Bosch for them to authorise it. Then slow time the bike shop orders another motor, I don't understand why companies wait for the parts to arrive. It’s not just bike shops it’s all areas. They certainly don't have the same ethos as Specialised.
 

EMTB Forums

Since 2018

The World's largest electric mountain bike community.

559K
Messages
28,290
Members
Join Our Community

Latest articles


Top