Fitting Shimano E-Gears

[OzzyPT]

Hi All

Just a quick question.
Is it possible to fit the Shimano Xt Di2 1x11 to a Voodoo Zebop e bike?
I have done some searching and it all seems a little vague.
On the Steps display, it shows and M for manual gears, so I suspect that there is an option for auto. The bike runs on a Shimano E7000 motor and E 8010 battery, so not sure if that can run the gears. The steps display has two spare ports on it.
So if anyone can give me some advice that would be sweet.
Not looking to go out and buy anything yet, but I am very interested in the system.

Cheers
Ozzy

 

[B1rdie]

Hi, my bike had an E8000 motor, and it was very easy to install the Di2 xt 11speed. I used stunlock app to change the setting from manual, so am not sure if it can also be done with the shimano app. After changing, I just plugged the shifter cable to the display and the deraileur cable to the motor. The shimano app recognized both and made the firmware upgrade and started working perfectly.
I am very happy with the results and recommend doing it.

 

[OzzyPT]

Great news
I'll have to take a close look at it.
Thanks for the reply.