Curiousman
New Member
Can you guys please provide us with the serial number of your motor ? Thanks in advance!
Dengfu E10 / Bafang - Buying/Pricing
- Thread starter Rob Rides EMTB
- Start date
There are a few numbers on the motor, it's not obvious which is the serial number. There's some on the underside of the motor and some on the underside on one of the fins on the side of the motor. Do you know happen to know which is the serial number? I asked melody if I would receive the latest iteration of the Bafang and she assured me I would...
Curiousman
New Member
There are 2 numbers engraved below the motor.
The top line is the motor model (MM G520.250.C 19 for the M500 48V) and the bottom line is the serial number, probably 13 numbers...
Last edited:
thaeber
Well-known member
This is my motor!
Afifz
Member
When did you receive your motor?
Afifz
Member
I received my motor this week and it seems the spec is different. It seems that mine has a different speed rating or speed limit...it is rated at 18A vs the earlier version of 10A. It is also rated at 500W. Or is this just an M600 vs M500 case?
Afifz
Member
Yours seems to be the same spec as mine. 500W.
You and I have the M600, thaeber has the M500. Different motors that both fit the E10 frame. You can choose which you want to have when you order.
Afifz
Member
Ah... that explains it. Still waiting for my battery and frame....
thaeber
Well-known member
3 Weeeks ago, ordered Feb. 23rd. Today I received the DPD Trackingnumber from Melody for Frame and Battery.
Afifz
Member
Ah so your battery will come together with the frame? If I remember correctly you made your order in early Feb right? I hope mine arrives before I go abroad in June. No one will be there to receive the package if it arrives after June 12th! At least from your case there will be some sort of tracking number...
thaeber
Well-known member
As written above, ordered Feb. 23rd. I received 2 Trackingnumbers, Frame and Battery will be shipped sepreately. I asked Melody for a status update yesterday, she replied with the Trackingnumbers. I doubt that You will receive the shipping status info without asking from time to time
Afifz
Member
Ah... Good advice. I'll drop her an email next week.As written above, ordered Feb. 23rd. I received 2 Trackingnumbers, Frame and Battery will be shipped sepreately. I asked Melody for a status update yesterday, she replied with the Trackingnumbers. I doubt that You will receive the shipping status info without asking from time to time
captainhightop
Active member
Bafang cranks (top) Luna X1 cranks (bottom)
Took 7 days from order to arrival from Luna (to UK) - no duty to pay (although I have been caught by this from Luna before when I bought a couple of chainrings from them)
Not tried them yet as I haven't got frame or battery yet, but will post findings when I do.
One point I did notice is that the paint / anodizing appears to go into the thread on the Luna ones, so the threads might need clearing with a tap first.
- Bafang - 170mm / 571g
- Luna - 150mm / 462g
Took 7 days from order to arrival from Luna (to UK) - no duty to pay (although I have been caught by this from Luna before when I bought a couple of chainrings from them)
Not tried them yet as I haven't got frame or battery yet, but will post findings when I do.
One point I did notice is that the paint / anodizing appears to go into the thread on the Luna ones, so the threads might need clearing with a tap first.
Afifz
Member
Other than the Luna crank arms, are there any other aftermarket crank arms that are compatible with the Bafang motors? Are the Bosch crank arms compatible with the Bafang motors?
captainhightop
Active member
Going on what I read on the forums it's not a standard ISIS spline, which is very annoying. Maybe it's a licensing issue or bafang just want to sell more cranks. I read somewhere lekkie were thinking about doing some, but nothing on their site yet.
Puschtrale
Active member
Puschtrale
Active member
Can anyone tell us from what firmware number on we are talking about the "new" m500 with the soft- and hardware update Rob mentioned ?
thaeber
Well-known member
No, unfortunately not. But I can tell You from the engine number on Your motor, that the motor was No. 37 build on February 23rd, 2021. My motor was build same day, No. 27. So I assume the motors are flashed with the latest firmware.
thaeber
Well-known member
Oh....did You get a tracking number for each - motor and battery, or one tracking number for both? Where are You located?
thaeber
Well-known member
Tadaaaaaaa!
BootsDave
Active member
Snap! Mine arrived today too. I notice that you don’t have a hole for the battery charging socket? Did you go for the standard 840wh battery?
Afifz
Member
I received mine today too! Overall it seems like a decent piece of kit. My only gripe would be the not so perfect fit of the battery cover. I have yet to receive my battery though. I hope it'll arrive soon. I will probably start priming it for painting now.
BootsDave
Active member
I can see on Rob’s and Patdam’s bikes that it’s above the motor. I assume they’ve moved it to avoid water ingress?
thaeber
Well-known member
Did You weiht it? Mine 19.5 inch is 4.3 kg! Not what I expected. Does someone know the rear brake standard? Is it PM 180? Thanks guys!
thaeber
Well-known member
My charging socket is on the top of the motor, like Rob‘s!
Similar threads
EMTB Forums
Latest articles
-
Introducing the Forestal e-Cygnus - a downcountry and XC emtb
The new Forestal e-Cygnus is a slightly unusual emtb. It comes in two... -
2025 M1 Sporttechnik EN 8.0 review
The M1 EN is one of four M1 models built on the same frame. Well, it’s...