- Thread starter
- #91
No it’s a good observation but the bike only has a restriction when assisting the riders input. So free wheeling is not an issue. Would be very dangerous ?
2019-2020 Levo (2020 Kenevo) Speed Unlock Levociraptor
- Thread starter TrailwattsUK
- Start date
No it’s a good observation but the bike only has a restriction when assisting the riders input. So free wheeling is not an issue. Would be very dangerous ?
Ok, so it won't limit downhill speed then. Good to know
fragledoozer
Member
just to confirm works fine on a 2020 do i get discount on a battery for being a test dummy
raulvillanueva
New Member
Any news on 2020? just got one last week and already place an order of the levociraptor
Any news for the 2020 test?
- Thread starter
- #96
3.034 and Kenevo 2020 tested ?
- Thread starter
- #97
Trailwatts customer trialed the planet 3 till it broke. Time for levociraptor ?
Works well i guess?
congerball
Active member
Hello, apologies if this is a stupid question but.....My motor firmware is 6.1.0 is this the number I need to check? Or is it 1A.B.0 from the display page? Sorry for being thick ?
Thats what i thought when i saw the planet 3 for the first time. There will be lots of mechanical issues...:-(
Ordered and paid already for my 2020 Comp.
MuddyFunster
Member
Hi,
So it will work on my Turbo Levo Comp 2020??
Can't really help you with that one, but other (2020) Levo owners are saying yes
How difficult is the installation?
10 minutes (if you take your time) it's a pretty foolproof installation. Comes with a PDF (also posted on this thread somewhere) that's clear and easy to read.
How could it be (de-) activated?
Remove the TCU, turn the dial back to the default setting for your wheel size, re-initialise, job done. Again a 10-minute job.
/MuddyFunster
So it will work on my Turbo Levo Comp 2020??
Can't really help you with that one, but other (2020) Levo owners are saying yes
How difficult is the installation?
10 minutes (if you take your time) it's a pretty foolproof installation. Comes with a PDF (also posted on this thread somewhere) that's clear and easy to read.
How could it be (de-) activated?
Remove the TCU, turn the dial back to the default setting for your wheel size, re-initialise, job done. Again a 10-minute job.
/MuddyFunster
desmoracing
New Member
I have one on order for my 2020 Kenevo Expert, will report once received and tested
Welshman
Well-known member
@TrailwattsUK
what about something for the Bosch active line.........no one seems to do anything for the Bosch systems
what about something for the Bosch active line.........no one seems to do anything for the Bosch systems
muzzman1
Active member
Did my 1st ride with the Levocirapter. Had it set on 4. Works great, as advertised. It felt like the motor was giving more assistance at low speeds as well? Is that my imagination?
I also decided to put it at 3. Seemed like too much assist on roads to my trails.
Motor was 50C after a 1 hour ride, which I fear might be high?
Anyone know what are "normal" temps for the motor.
I also decided to put it at 3. Seemed like too much assist on roads to my trails.
Motor was 50C after a 1 hour ride, which I fear might be high?
Anyone know what are "normal" temps for the motor.
desmoracing
New Member
Should have nothing to do with Assist, levociraptor diesnt change that, you can always check in MC. If you are pedaling at 45kmh for some
Time it’s pretty normal hour motor gets hot
Time it’s pretty normal hour motor gets hot
Someone on here was making swap out circuit boards for the bosch units so you could completely re-program them..... finding the thread though ...
EDIT : can't find the thread, but it was @Bearing Man who was making the alternative boards I think.
Last edited:
Ebikes aren't going anywhere..........no matter whatthere are clever people in the world, but mainly dumb F*ckers who would do 86Kph or 54 MPH on a mountain bike not designed and built to not fall apart at that speed. You just know these guys will get Ebikes banned in the UK don't you.
I wonder what the range would be
Welshdragon
New Member
Done my first ride with the Levocirapter. Had it set on 3. Works perfect, it is now how the bike should have been from the start.
- Thread starter
- #111
Thank you?
Snatch
Member
I have mine set on 4 it’s very good but I cannot adjust to correct speedo reading can any one help please. I have the turbo levo speedo.
- Thread starter
- #113
Have you followed the chart within instructions regarding speed multiplier within BLEvo app.
Snatch
Member
Yes I changed in BLEvo to x2 but still not changed.
I’m obviously missing something !
Snatch
Member
Probably easy to ask .. I would like to set limit at 25 mph plus
What should all be set to ?
What should all be set to ?
- Thread starter
- #116
You have set the multiplier to x2 then adjust your wheel size below the multiplier to your specification.
So he would set his Levocoraptor dial to 4, his multiplier to x2, and adjust rear wheel circumference to actual? That would take him up to 36mph assist?
For 27mph assist would it be dial to 3, multiplier to x1.5, and rear wheel circumference to actual?
Thank You for your patience.
Snatch
Member
I cannot drop the wheel size to 2000 the lowest setting is 21000 ?
Snatch
Member
- Thread starter
- #120
Leave this with me. I will test on my bike this week to adjust
EMTB Forums
Latest articles
-
The most reliable motor brand (in Norway)
A poll was posted on a big Norwegian emtb facebook group. There are...- Knut Nes
- 3 min read
- Views: 800
- Reaction score: 4
- Comments: 2
-
2025 Canyon Spectral:ONfly CF Ltd review
We were quite surprised to read about the new lightweight Canyon...- Knut Nes
- 7 min read
- Views: 908
- Comments: 1