190mm fork on dengfu e10

[vancouver rider]

i am ordering 2 zeb ult for my friend and myself haha. so we picked a 170mm. now for the other one. should we go 180 or 190 zeb ult? would 190 be too much overfork this e10?
hahaha anyway sound fun!

 

[dvng]

i have 190mm on my E10 and running mullet. Rear with offset bushing and 216*63 shock. I believe 180 will give a better geometry although there is nothing wrong with 190mm setup

 

[vancouver rider]

i have 190mm on my E10 and running mullet. Rear with offset bushing and 216*63 shock. I believe 180 will give a better geometry although there is nothing wrong with 190mm setup

if mullet you can go 190 then.
i am doing normal 29er front and back i should be ok with 190? i should be better geometry than your mullet set up?

 

[PerseverantOne]

i am ordering 2 zeb ult for my friend and myself haha. so we picked a 170mm. now for the other one. should we go 180 or 190 zeb ult? would 190 be too much overfork this e10?
hahaha anyway sound fun!

Hope you got the 2023 Version with BUTTERCUP DAMPER system on Debonair+, if you bought the 2.1 ZEB setup only the ZEB can be gutted and upgraded to the Buttercup Damper 3.0 Setup that came out as a 2023 Item but is for sale now.

 

[PerseverantOne]

if mullet you can go 190 then.
i am doing normal 29er front and back i should be ok with 190? i should be better geometry than your mullet set up?

I am looking to keep with 27.5inch rims, but I need serious travel for big drops, & want it to be smooth. I keep leaning towards the new 2023 Buttercup Damper 3.0 by RockShox, & Fox Grid2, what's the best rear shock for someone like me 5'11.75 height 150lbs? going off an 8foot drop is the goal, without damaging the E-10 Frame. do you think it's possible?

 

[Dirtnvert]

You might want a boxxer or fox 40 set at 190. At 190 on a single crown fork doing drops chances are youll run into creaky CSU's. Triple clamp all day for drops and at 190mm the axle to crown is the same as a zeb/38 at 180

 

[Chairman]

Can you buttercup a boxxer?

 

[PerseverantOne]

Can you buttercup a boxxer?

No need 38mm stanchions