Search results

  1. steve_sordy

    Bike Bling

    When I get a choice, I go for satin black. I will not pay extra for bling. But some years ago, I had to replace one of the decals on a fork leg. When looking around I found that Fox did what I would call "stealth" decals - black of a different surface reflectivity to the black paint on the fork...
  2. steve_sordy

    Flip Chip - Must I ?.

    Try the mullet configuration, you might like it. My first 29er was my previous emtb and it was forever buzzing my arse on steep descents. My current emtb is a mullet and I no longer get buzzed. :) As to your original question, do you have to use the flipchip?; try it both ways to see which you...
  3. steve_sordy

    Zeb Dual Position

    @grim007 If you cannot tune the suspension fork with spacers, then return the fork. You will need to tune the fork sooner or later, unless you are the perfect mix of weight / have plateaued on the learning curve / have uniform trails.
  4. steve_sordy

    Headset bearing replacement All trail 4 Haibike

    These people may help. Trail Vision specialises in all types of bearings for bikes. They also have bearing sets for popular bikes, plus loads of information to help you get the correct bearing for your bike. If all else fails, give them a call. They are competitive with other main bearing...
  5. steve_sordy

    I hate carbon

    I was buying alloy frames that claimed to be "hydro formed" many years ago. I didn't disbelieve the claims, I only had to look at the changes in cross sections approaching joints to see for myself. Every CF-frame that I have bought was as far as I could establish, lighter than the alloy version...
  6. steve_sordy

    I hate carbon

    When I was riding mtb I bought a bike because I liked the test ride and it turned out to be CF frame. I was a bit hesitant with it on the work stand to start with but very soon got used to it. The next mtb I bought was CF by choice. My first emtb was CF by choice because by that time I was...
  7. steve_sordy

    What did you buy your ebike this week?

    @Sanzun Gorilla Tape Warning! :eek: https://www.emtbforums.com/threads/removing-gorilla-tape-residue-from-wheel-rims.17418/
  8. steve_sordy

    Spray Lube - What do you use?

    Apart from the Silicone Shine, which I don't use as frequently as you, that is pretty much the same as my cleaning routine.
  9. steve_sordy

    I hate carbon

    ooops! :giggle: Santa Cruz Bicycles - Test Lab - Pinkbike Remember, to cut out the testing (which is v. interesting), and go to the Pinkbike entertainment go to 5:00 mi
  10. steve_sordy

    Bike Frame Protection Tape / Roll

    I use BYK Armour. I just noticed that you prefer matt, this is glossy, but they may do a matt. Helicopter Tape Bike Frame Protection Tape Premium Super Clear Glossy | eBay No idea where it comes from, but it is relatively cheap and it lasts for ages. Easy to remove too if you use a hairdrier.
  11. steve_sordy

    I hate carbon

    @2WheelsNot4 Here is a 6 min vid of Santa Cruz testing of a carbon frame. https://www.pinkbike.com/news/santa-cruz-bicycles-test-lab.html If you want to go straight to the "Official Pinkbike Swing-A-Carbon-Frame-Into-A-Concrete-Block Test" then go to the 5.00 point. Prepare to be amazed...
  12. steve_sordy

    Spray Lube - What do you use?

    Has WD40 changed its formulation in recent times? I ask because I was always told that WD40 was the work of the Devil as far as bikes were concerned. It penetrates seals and breaks down grease and oil, neither of which you want to happen anywhere near your suspension or your bearings. The only...
  13. steve_sordy

    What EMTB would you get for 5k?

    As it will be your first emtb, I strongly recommend a test ride. Yes, I know, they are not as easy to get as they were before the Pandemic when all bikes sold out. But things seem to be getting back to normal and test rides are no longer out of the question. I was fortunate enough to test more...
  14. steve_sordy

    What EMTB would you get for 5k?

    I see a typo! It should be knockbollocks!
  15. steve_sordy

    Kenevo Gen1 Chain length

    Send when you can. I'm not sure what triggers the lack of newness. I suspect it is the number of posts.
  16. steve_sordy

    What EMTB would you get for 5k?

    I have bought two emtbs (Focus and Merida) from JEJames. They are on online retailer who also happens to have High Street shops. The one I dealt with is a 3-hour round trip for me, which is a bit too far TBH. But they had the bikes I wanted and their service is excellent, which is why I had no...
  17. steve_sordy

    What EMTB would you get for 5k?

    The standard advice on this forum for someone on their first emtb purchase is to buy local. You may be a mechanical bike repair guru, but it's the "e" stuff that is the problem. Not just the motor and battery, but the charger, display, sensors, wiring, software, apps, motor tuning, updates and...
  18. steve_sordy

    Kenevo Gen1 Chain length

    There are loads of different ways to do it all on YouTube, but the key thing to take into account is the extension of the wheelbase when the rear suspension compresses. Even single pivot rear suspension may extend the wheelbase, depending upon where the pivot is placed, so it is important that...
  19. steve_sordy

    Polishing Alloy to a high gloss with Sand Paper

    I too believe that water with some fine wet & dry abrasive will do the job. When I was an apprentice, back in the late 60's, we used paraffin when machining aluminium. But that was before Health & Safety! Do not try this at home! :eek: I just found this on Google: Is WD40 good for cutting...
  20. steve_sordy

    Shimano ep8 Assistance Settings

    Set the EP8 max torque to 70Nm which is the e8000 max torque. You may wish to dial down the assistance character too, but I have no data on what that might be. Assistance character is what brings the bike alive.
Top