Search results

I was doing a strip and check on the bike the other day and noticed one of the bearings around lower chain stay was a bit rough so looked on line for some replacements, i actually looked for a list of what bearings went where, I could not find one so had to strip the bike again check, and take...

Did you get the bottom of this issue my bike has just started doing this.

I had a similar issue had to pry the battery out carefully, i ended out removing and stripping my latch a small piece of plastic had lodged inside preventing the latch from fully winding out removed it greased the mech and it was fine.

It does as I found out, you may as well work out your distance based on 90% use as the last 10% drops very quickly its just how lithium batteries work its annoying but once you get your head around it is fine - they must be able to calibrate this out in software and show actual energy remaining...

I hate the auto assist , I so want to like it but there are so many things i dont like about it, I stick with manual modes.

I have 150mm Mirandas love them

They have been looking at the new Giant Bikes a lot on EMBN its the New Light Trance not Reign BUT they have the same App and they have been discussing the different settings including the Launch Setting, The Launch if you did not know controls how fast the power builds to the max you have set...

All of the bearings axles etc were dry on my bike from new greased them while looking for a creak on my bike that turned out to be the seat tube.

I would be asking for bearings to be replaced under warranty

Another one for seat Tube.

I set mine so support torqu and launch all increase in each mode only 4 and 5 get full 85nM and it seems to be ok only had 1 ride so far with those settings and that was sessions on a DH line

What is you cadence I try to ride at 80+ rpm Often being 90-100 and notice a difference between all modes especially up hill

400 was the max on 85Nm 2022 bikes or was on mine lol

My bike shop changed the loom including the external port ans the Battery connector inside the frame and i had also updated the software that was recently released and it seems to have fixed the issue - Tip I plugged my charger in to a power monitor plug, you can see that although light is...

My Average is often around 40 because i'm not pedalling when i ride downhill and my Garmin does not take this in to account, I have quite a high pedalling cadence often around 90 but average is similar to Calum.

It was the ride back to the car park, temperature was same as rest of the ride assist was Auto and its NOT the last 10% issue as it was 17% as per the post Im familiar with the 10% faster drain this was a sudden drop as per the graph

62.5 according to web site.

First Ride after the software update power Dropped from 17% to 4% in about 2 minutes of riding not had the bike out again hoping its a 1 off.

I changed to Miranda 150mm Love the bike with them on, i did put a 34T chainring on over the 36T to compensate for the torque difference on cranks.