Search results

  1. M

    2024 Strive:ON

    Give me 5 minutes and I remove my stem to show you with picture. Like I said kid job
  2. M

    2024 Strive:ON

    You don't need to remove any cable. Like on any bike you remove the the stem, then drop the fork. then you can lift up the ring where the 3 cable goes through and then you have access to the bearing. what is the problem? The cable don't go through the bearing they pass on the side of it. so no...
  3. M

    2024 Strive:ON

    OUps forgot that little screw that hold the cable on the leg of the fork! so that 6 screws!😂
  4. M

    2024 Strive:ON

    For me taking out the headset bearing exactly same job as on bike with "normal" cable routing. it's a 10 minute job max to take them out and back on. Five screw to unbold after you remove the wheel. kid job The first thing I did when I got my strive out of the box was to change the fork for a...
  5. M

    2024 Strive:ON

    Do you think a 210mm One up dropper post will fit in a size small Strive on?
  6. M

    2024 Strive:ON

    we are all different level of interest to those electronic thing's. Some like the clean look some are more geek and need a lot of info on their bike. I'am on the opposite side: NO Garmin, No Watch, No app on my phone, No Strava, No Gps, No statistic..... Just load of fun when I ride the bike...
  7. M

    2024 Strive:ON

    The bosch motor is loud uphill ( louder than Shimano 8000) and on downhill you have the clunk noise of the motor free wheel. But that is offset by the riding benefit of this amazing bike. And to be honest I just hear the clunk on the first meter of the downhill after that I have other thing to...
  8. M

    Pole Voima 190mm Travel EMTB

    Says the guy who just got a brand new bike with fox 38 grip 2 in black but bought a Grip 2 orange because orange is faster. 🤣🤣🤣 Just trying to find the door of a church but their is so many different kind don't know who to follow😂😂😂
  9. M

    Pole Voima 190mm Travel EMTB

    Seriously 400 Euro more for 50gr ( 1 extra expresso in the morning in your stomach) 400 euro to save 0.2% of the total weight of the bike. Some time passion is mysterious. After that I'm not surprised some can believe in God 🤣🤣🤣 Just hard kidding😱😃...
  10. M

    Pole Voima 190mm Travel EMTB

    On gravity downhill more weight =faster racing downhill ski's are crazy heavy one of the reason is they genratte more speed. their is also other reason why they have to be heavy. But I like a lighter bike easier to move around downhill and more pop. but every weight saving are not equal...
  11. M

    2024 Strive:ON

    Is there something interesting about connecting your phone to Bosch engine? On my last bike ( Shimano) the only thing interesting was to put it on USA market to get a bit higher speed. So I connected it one time at the very beginning and never again. How do you connect to Bosch. Is there an App...
  12. M

    2024 Strive:ON

    Just been on my home run. Woaw! What a bike!!! Thank you so much Rob for your video 🙏🙏🙏🙏🙏🙏🙏. Every thing you said is spot on. I owe you a very good bottle of wine from my area. This thing is a supersonic magic carpet. It generate so much speed and the more speed the more it feel confortable...
  13. M

    2024 Strive:ON

    My heckler is not anymore a real heckler. More close to a bullit. And it’s 2020 heckler so front and rear 27.5
  14. M

    2024 Strive:ON

    You also on MX setting Front brake right 🤘🤙
  15. M

    2024 Strive:ON

    Tomorrow morning I will see if the strive on is better than my heckler 170mm front / 165mm rear 62,5* degree fork. Both have very similar geometry same length about same reach. the heckler is much lighter. Let’s see how it behave. But the strive on is higher in front and has 29 front wheel.
  16. M

    2024 Strive:ON

    Clean vs messy 🙂
  17. M

    2024 Strive:ON

    Compare to that mess on my Heckler
  18. M

    2024 Strive:ON

    I love the canyon setup. Look how clean the bar look! You don’t need extra line length because everything turn together. Bye bye AXS 😄
  19. M

    2024 Strive:ON

    It’s very easy to make a groove at the bottom of any stem. Take 10 minutes max. You use the canyon part as template to mark where to grind
  20. M

    2024 Strive:ON

    I had to make groove with the grinder at the bottom of the burgtec stem so that it link to the pin of the canyon headset that turn with brake line.
Top