I had to go with "I will buy if there are no alternatives" because, well, I did buy an LCE930 and the pluses exceed the minuses. However, It was pretty painful getting the steerer tube between the cables and honestly I am a bit anxious about what is going on in there with the steerer tube and...
I regret not getting a decent scale and weighing the components before installing them. Based on my findings I came up with a combined 2.02kg. The Hayes built DUROC 35 wheels claim a combined 1.86kg.
The rear shock was a take off from a pivot shuttle with very few hours that I picked up for $180 shipped on pinkbike and the fork was a steal on sale at $340 (new) including shipping from Jenson USA. The rest of the parts are also new and came from aliexpress. Well, other than the rear brake...
Luckily I was able to repair my charging port but this is great information for those who find themselves out of luck with broken sockets. Thanks, nice work!
I found the issue. I guess I was being a bit too aggressive when stashing the cables and severed the +/- wires.
Some dremel tool work:
Solder and epoxy:
And it's taking a charge.
Thanks again for all of your help.
Thank you all for sharing your knowledge! The canbus connector for the battery comes off of the motor/controller. I wish I would have tested the charger before I mounted the motor covers, cranks, etc.. Oh well, looks like I'll be dropping the motor and checking the connections and charging...
Thanks for replying. The pinout in the manual you sent appears to be the same pinout on the charger feildbikes sent, they are both bafang.
Mine
The manual
I am just finishing the build on my LCE930 with the 43v 410wh battery and I am having a charging issue. The charger flashes green as it should when it's not plugged into the charging port but when I plug it in it goes solid indicating the battery is full when it is only showing 31%.
Any advice...
My LCE930 Build is underway!
Thanks to Lightcarbon for providing such a well built frame! It looked flawless on the inside and outside.
The Components:
The total build cost is 3117.89 USD including shipping, taxes, etc.. The anticipated weight is 19.47kg -> Actual weight is 19.77kg.
Part...
Thanks for creating the YT video and this thread. You and Rob Rides EMTB inspired me to do a custom build. I am going for a budget LCE930 build using the brakes (+ metallic pads), groupset, wheelset, and dropper post from the links you provided. I am impressed with the quality of the components...
Hi all! I have an LCE930 frame on the way and have a 2023 Fox Float X Performance shock 185mm x 55mm. Will this work on this frame and if so will I need additional hardware? This will be the first shock that I have installed with the threaded mount holes on the shock body side.
The width at the...