Tapered is what you want (1.5" lower, 1.125" upper)
I found one on eBay and asked about taper and this is the response…
It’s tapered 1/5 to 1/18 with Debon Air.
So that 1/18 is no good?
Tapered is what you want (1.5" lower, 1.125" upper)
$5,899 USD.That looks nice, may I be so rude as to ask how much you paid for it as I’ve got that model, I think, on my shortlist.
Whenever I get a new bike I am constantly trying to resist the urge to upgrade parts, even if those parts are currently suiting me just fine.Decided to save some pennies and keep the stock fork on the 9.5. For my needs it’s doing ok as I’m not doing bit hits or drops etc, will upgrade it when I can afford a bigger step up rather than just a small step.
Whenever I get a new bike I am constantly trying to resist the urge to upgrade parts, even if those parts are currently suiting me just fine.
Thanks, I didn’t realise you were in the US. This model is available at £4,395 in the UK.$5,899 USD.
Very nice. Is that the wireless Transmission drivetrain. Kind of regretting not going that route, even though my XT setup is performing just fine. I just like bells and whistles.Thanks, I didn’t realise you were in the US. This model is available at £4,395 in the UK.
I‘m close to pulling the trigger on one of these but its either this or the Whyte elyte RSX.
It‘s so difficult to get a test ride unfortunately. I was hoping to test this below that I’ve been offered but it’s fallen through for now.
View attachment 156882
I think black is a shiny black, and diffusion black isa matt black.Random question, Rockshox - black and diffusion black, whats the difference?
The details on Rockshox website show some forks come in both but only show one image/colour.
I think black is a shiny black, and diffusion black isa matt black.
I've got the identical bike. One up bar and stem. Changed airshaft to 160mm.Hi folks! I just picked up a 9.8XT and so far I'm loving it! I've been running laps up and down my local trails, where previously I would do one lap and be gassed. I am absolutely loving this thing. Just enough umph to get me up the steeps without tiring me out, but I still get plenty of exercise, and I get to bomb down the mountain over and over again. And it's absolutely inaudible, which is amazing. Keeps me from getting dirty looks from the purists out on the trails. I have an older 27.5 rear wheel in my garage and I'm going to swap it out just to try out the mullet on this bike. I am a fan on my hardtail so I'm betting I will prefer it that way on the Fuel as well. I already swapped out the saddle too. My butt and that Arvada just didn't get along. I'm still not sure how I feel about the handlebar/stem combo, but I'll give that a few more rides. Otherwise I am absolutely loving this thing. I was a little worried I would regret not getting a full fat like the Rail, but after only fifty miles or so I am 100% sure I made the right choice. Cheers folks! Happy to be part of the community. View attachment 156838
I am 11 months into my 9.9. I’ve lost 35 pounds, with 50 miles of riding a week. I love the bike. It’s my 3rd e-bike, and by far the best (former was the Bosch at 85nm). I am happy with the power at 50nm. As it forces me to ride the bike and put in my own power, all whilst giving me the boost needed for the big hills or at the end of long tiring rides. I can’t say enough about this bike. The first few pages of this thread have some folks “waiting for more power” that’s 3 years of waiting. Don’t wait , this bike is the bike.Do you think the bike is still relevant in today's date, meaning still a good choice, for the sale price of $3800?
Or one would be better served by something else, or perhaps wait for updated version of Ex-e with stronger motor and larger battery. Perhaps never coming... speculating here a bit based on what most folks and reviewers see as ideal bike- SL bike with larger battery. Or majority of folks here think, it is still perfect bike, even now, 3 years after it's first release, for that 2-3 hour rides, mostly for riders that want just a bit help and are in decent shape?
The way I'd look at it is this:The bike was 9.8 model, upforked to 160mm, with RockShox Super Deluxe Select+, I'm 80kg rider and I ran my Float X on stumpy at 190psi, on this bike I started riding with 200psi with neutral rebound and ended up deflating down to 180psi with two clicks from slowest rebound and it still felt not where I wanted it to be as I wanted more planted feel (I tried lower pressure with faster rebound also, but not what I wanted easier). I used only about 80-85% rear travel, red ring on the shock, which is wild I didn't baby the bike.
I guess I was off with setting rear shock right, which rear shock pressure is good for this bike for 80kg for more planted feel?
Thanks, ur right I should have started from setting sag not psi, I just gave it a quick glance it seemed like true but probably should have paid more attention to it. Owner told me he added one additional volume spacer while recent service, but I cant see any reason behind that he cant reach full travel easier even being heavier.The way I'd look at it is this:
It is actually a pretty linear suspension, at least some shock tuners have told me too linear for coil shocks. You shouldn't have an issue using full travel.
- 30% sag should be your baseline, not the PSI. Your stumpy has different leverage & shock length so will use different pressure to get 30% sag.
- If you were at 30% sag and still only using 80-85% travel, the shock may be stuffed full of volume spacers, or something else (yikes)
Very much depends on the type of bearing, angular contact etc. Can you ask the mate who is doing the damper upgrade if he is able to see the bike? Do the two crown races look the same? If the crown race is a split type, it should come off fairly easily to swop over.So the fork I purchased already had a crown race fitted. What’s the best way to check it’s the correct one? When I take my old fork off slip on the bottom bearing and check it’s a good fit?
Suspension set up can be a dark art and many riders simply plug in a new fork to compensate for what is perceived to be poor performance, when it reality it’s the setup of the unit that is incorrect for rider weight, style etc. when supplied with a bike, the suspension is set “average”. Not that I change bikes often, but I’ve always rented or loaned a shockwiz to get things right. Or send it off. I bought a used Orange Five for my son, knowing the shock needed a service. I sent the shock and my sons details to TF Tuned and they serviced it and returned it. I had a shokwiz to hand so we did some loops at a local testing trail and this confirmed T F Tuned had the settings, this is pressure, LSR, HSR, LSC AND HSC, all correct, save for two clicks on HSC. A little bit of time on setup can reap rewards, and shouldn’t really require any further alteration.Thanks, ur right I should have started from setting sag not psi, I just gave it a quick glance it seemed like true but probably should have paid more attention to it. Owner told me he added one additional volume spacer while recent service, but I cant see any reason behind that he cant reach full travel easier even being heavier.
Very much depends on the type of bearing, angular contact etc. Can you ask the mate who is doing the damper upgrade if he is able to see the bike? Do the two crown races look the same? If the crown race is a split type, it should come off fairly easily to swop over.
The World's largest electric mountain bike community.