What's your analogue bike look like ?
- Thread starter Stretch40
- Start date
04fuxake
Active member
Username checks out.....
CBSTD
E*POWAH Master
Your chiropractor must be laughing all the way to the bank?
- Thread starter
- #4
Haha I'm 6ft6 6ft7 ISH with long legs it's a XXL frame 560mm seat tube with a Chinese 450mm carbon post lol it cost me £475 1x10 deore I bolted a spare recon fork on made a boost wheel with a xt hub and original rim fitted Chinese bars and seatpost it weighs 11.5kgs and Ali I'm amazed ? but it's for riding to the cafe and back cycle track 
CBSTD
E*POWAH Master
Backs are a sore point with me just now, currently off the bike for 6 weeks minimum so enjoy folks because you’ll be guaranteed 6 weeks brilliant weather ?
pampmyride
Active member
Steel is real!
My trek stache is the last one I would give..
h
Of all my bikes, still have a spectralon, another trek: the rigid fork superfly, a KHS small urban/dirtjump and a 26 full sus stumpyjumper.
The geometry and possibillity of set up as singlespeed and the use of fattires is what I most like on these trek bikes designed by Gary Fisher
will show the other ones later on
Of all my bikes, still have a spectralon, another trek: the rigid fork superfly, a KHS small urban/dirtjump and a 26 full sus stumpyjumper.
The geometry and possibillity of set up as singlespeed and the use of fattires is what I most like on these trek bikes designed by Gary Fisher
will show the other ones later on
Neeko DeVinchi
E*POWAH Elite World Champion
Huge Spesh fan so between my Stumpy, Enduro and my new Status, I'll always have an excuse to swing a leg over a regular bike.
P.s. please don't call them 'analog' or 'acoustic'.
Yhew ?
P.s. please don't call them 'analog' or 'acoustic'.
Yhew ?
Neeko DeVinchi
E*POWAH Elite World Champion
No.34
Yhew ?
I'll stop saying acoustic and analogue if you stop saying yhew?
Neeko DeVinchi
E*POWAH Elite World Champion
It's a deal ?
Supratad
Well-known member
Strictly retro
Shinn
Well-known member
The only one I've kept and not ridden for quite a few years. Thousands and thousands of miles on her and at least 4 drive trains from Florida to IL, Colorado and California as well as Utah and Arizona - all back in day the when a dropper post was a stupid spring and 3x8 drivetrains were considered cool and 3 x 9 was epic. Well before tapered steerer tubes and when 2.5" travel was considered a lot...I still have warm fuzzies when I think of the day I ditched the cantilevers for v-brakes.
Shinn
Well-known member
I remember that mountain cycle, the owner of my LBS has his old trek Y-Bike on the wall...those were the good ole days.
Awaiting the return of the Merida with new forks this week so last night had a quick blast on "Old Faithful"!
1995 GT Team RTS frame, mainly Shimano XT groupset with Manitou forks. Only weighs about 25lbs/11Kg! Felt amazing until I needed to do a short, sharp climb! That had me huffing and puffing...
Need to give it some serious TLC over the summer. Thinking strip down and rebuild.
1995 GT Team RTS frame, mainly Shimano XT groupset with Manitou forks. Only weighs about 25lbs/11Kg!
Felt amazing until I needed to do a short, sharp climb! That had me huffing and puffing...Need to give it some serious TLC over the summer. Thinking strip down and rebuild.
pampmyride
Active member
Talking of retro.... I need to have a clear out after the arrival of the electric wonder bike. This beauty will probably be the first to go. Please form an orderly queue...
Shinn
Well-known member
Is that even safe to ride?
I'd be wanting Zimmerframe levels of armour to try that out!
What does it ride like?
pampmyride
Active member
A few years ago it was my only MTB. I used it for the London to Brighton off road ride 2016. Got it running in the previous lockdown & it rides fine - nowadays you'd say it was an XC bike spec. I set a (strava) PB on this - super twisty track in a pine forest, the only place it was quicker than the Cotic I rode then. These date from 2004 - forks were crap back then, so a few had different ideas .
Cool, very bold design!
You should see if Doddy on GMBNTech wants it. He's got an MTB museum
The 2006 Gen 1 Nomad has now departed to the great mtb graveyard in the sky ..
The 2017 Whyte T130rs is still at home though gifted to my son ..
Currently having the following work done ..
New 30t Raceface Cinch n/w Oval chainring / Chain / Cassette/ Xt brake lever / bleed ..and I'm paying !?
The 2017 Whyte T130rs is still at home though gifted to my son ..
Currently having the following work done ..
New 30t Raceface Cinch n/w Oval chainring / Chain / Cassette/ Xt brake lever / bleed ..and I'm paying !?
Blue Moon
Active member
My 27.5+ Genesis Tarn 20, it's had a few upgrades since that pic was taken, but it's packed away.
2014 Charge Cooker 4 29er. I bent this frame on the Cairngorm Loop by hitting a very boggy patch and going OTB in a very stylish way.
I basically did a front flip and the impact ripped the rear wheel out of the dropouts, had to stamp on the rear triangle to get it narrow enough to get the wheel back in so could ride the 10 or so miles back to civilisation! It's in bits in the shed now.
I've also got 2 gravel bikes, a high mileage Norco Search 3 (in bits) and a brand new Genesis CDA 30.
Slimjim802
Active member
Here's my Nukeproof Reactor, its such a great bike but sadly cant see me riding it much now, considering just selling it...
Similar threads
EMTB Forums
Latest articles
-
Bosch-powered Merida is here – the eOne-Sixty SL and eOne-Eighty intro and test
Merida has used Bosch-motors for years, but not on the emtbs. The full...- Knut Nes
- 10 min read
- Views: 4K
- Reaction score: 5
- Comments: 9
-
Bosch ABS Pro and Trail Pro - an interview about the new ABS profiles
When testing the new Bosch Performance CX gen5, we were also introduced...- Knut Nes
- 2 min read
- Views: 6K
- Reaction score: 2
- Comments: 5