Shimano Ep801 RS upgrade

[Ktmkirby]

How does the dealers hook up to the computer for the motor upgrade if you don’t have the EN600 displa. I have a 2023 M10, and they telling me they have to drop the motor.

 

[Astro66]

There are 3 SD300 ports on the motor. These ports are normally under a very easily removed cover.

But not with the M10. The frame covers these ports, instead of a easily removed cover.

If you have this cockpit. You can unplug the SW-EN600-L switch. Plug in a junction to the cable coming from the motor, then plug your programming cable into the junction. This would be much simpler than dropping the motor.

 

[Astro66]

Oh BTW. With no access to your motor ports. I would just get a display installed. They are like 50 grams with the extra cable to go to your switch.

 

[Ktmkirby]

I figured there would be a simpler way. I think he tried that, but it threw an error code, something about not recognizing the motor. First time doing the upgrade at this dealer.

 

[Astro66]

Then use the 4 port connector, and plug the switch back in. You will need an extra SD300 cable.

 

[Astro66]

Oh BTW. If you undid the top 2 motor bolts. The motor should swing down on the rear bolt, and give you access to the ports.

You don't have to drop the motor....... Maybe ......