Scott Lumen eRide 910 customized

[Tomoooo]

upgrades (latest update as is)
DT Swiss XMC1501 carbon wheels
Vittoria Agarro 29x2.35 tires
Syncros Hixon integrated carbon handlebars
Shimano Saint Brakes
sram TQ 34t chainring
Sram XX carbon cranks
Sram GX AXS Transmission deraileur
Sram XX cassette and chain
Sram AXS Reverb dropper
SQ lab 60x infinergy seat
DT swiss fork remote
Ergon GE grips
Shimano XTR pedals
Bolts on callipers, fork, brakes replaced by titanium Better Bolts.
Thru axles front and back Carbon Ti

 

[VWsurfbum]

#NeedsMorePurple

 

[Sly07]

upgrades:
DT Swiss XMC1501 carbon wheels
Vittoria Agarro 29x2.35 tires
Syncros Hixon integrated carbon handlebars
Shimano Saint Brakes
Wolftooth 32t chainring
Sram XX carbon cranks
Sram GX AXS Transmission deraileur
Sram XX cassette and chain
Sram AXS Reverb dropper
SQ lab 60x infinergy seat
DT swiss dropper and fork remote
Ergon GE grips
Shimano XTR pedals

View attachment 131786 View attachment 131788 View attachment 131789 View attachment 131790

Nice,
Weight with pédals ?

 

[Tomoooo]

Nice,
Weight with pédals ?

So now I replaced also Fox Rythm with Factory , final weight with pedals (bike is in size L) is 17.45 kg

 

[Sly07]

So now I replaced also Fox Rythm with Factory , final weight with pedals (bike is in size L) is 17.45 kg

merci

 

[guglez]

Sram AXS Reverb dropper

Which travel does it have?

 

[Tomoooo]

Which travel does it have?

150mm

 

[Marcelfacd]

While upgrading, did you remove the motor and battery? I want to replace the brakes but guess I have to remove motor and battery. The hose is very tight and won't move along the battery.

 

[Tomoooo]

I had to remove the motor and also disassemble the rear triangle, there is such a small gap in the main triangle that I was not able to guide hose through it when rear triangle was joined. But that was maybe just me
No need to remove battery. But headset and motor definitely have to be removed

(Ignore the stickers on the table , used a table my niece decorated)

 

[Tomoooo]

Also maybe to note, at the time when I was replacing the brake hose, I did not have in the down tube dropper and shifting cables as I am running AXS dropper and shifting, so maybe because of that there was more room.
Also the brake hose is at the bottom of the frame attached to the frame with a zip tie.

 

[Tomoooo]

#NeedsMorePurple

Has more gold now to match brakes and Fox Factory fork

 

[Marcelfacd]

I had to remove........


Thanks! Good info to have. I see there is no need to remove the chain ring? Will have a go at it shortly, less concerned now

 

[Tomoooo]

No need, you pull out the whole motor, you can even leave the cranks there. There is no need to even disconnect the motor. You just put it aside and be careful not to drop it.

 

[Marcelfacd]

No need, you pull out the whole motor, you can even leave the cranks there. There is no need to even disconnect the motor. You just put it aside and be careful not to drop it.

Great!

 

[Marcelfacd]

No need, you pull out the whole motor, you can even leave the cranks there. There is no need to even disconnect the motor. You just put it aside and be careful not to drop it.

I did my upgrades and modifications now as well but wondering....what torque is needed for the motor bolts? Can't find them anywhere, my guess would be about 15 or 20Nm but maybe you know?

 

[Tomoooo]

Unfortunately no idea, I just tightened those by hand just to be right .
So far had no issues.

 

[Marcelfacd]

Unfortunately no idea, I just tightened those by hand just to be right .
So far had no issues.

Just found out...it should be 20Nm with medium locktite.

 

[rocketboy]

upgrades:
DT Swiss XMC1501 carbon wheels
Vittoria Agarro 29x2.35 tires
Syncros Hixon integrated carbon handlebars
Shimano Saint Brakes
Wolftooth 32t chainring
Sram XX carbon cranks
Sram GX AXS Transmission deraileur
Sram XX cassette and chain
Sram AXS Reverb dropper
SQ lab 60x infinergy seat
DT swiss fork remote
Ergon GE grips
Shimano XTR pedals

View attachment 131786 View attachment 131788 View attachment 131789 View attachment 131790

That is sweet. I also have a scott lumen 910 that Im in the process of upgrading. Do those XX cranks fit straight onto the TQ motor?

 

[Tomoooo]

Yeah, those are ISIS version

SRAM XX Eagle E-Bike Kurbel | schwarz, 239,50 €

SRAM XX Eagle E-Bike Kurbel | schwarz Eagle Transmission ist ein System für Deinen Mountainbike-Antriebsstrang, das neue Maßstäbe bei der Funktion und Zuver

r2-bike.com

And to remove old cranks tool like this

Longus sťahovák kľúk + ISIS adaptér - MTBIKER Shop

www.mtbiker.sk

For the XX cranks it is enough to have 8mm allen key

 

[Tomoooo]

Latest state

 

[rocketboy]

Yeah, those are ISIS version

SRAM XX Eagle E-Bike Kurbel | schwarz, 239,50 €

SRAM XX Eagle E-Bike Kurbel | schwarz Eagle Transmission ist ein System für Deinen Mountainbike-Antriebsstrang, das neue Maßstäbe bei der Funktion und Zuver

r2-bike.com

And to remove old cranks tool like this

Longus sťahovák kľúk + ISIS adaptér - MTBIKER Shop

www.mtbiker.sk

For the XX cranks it is enough to have 8mm allen key

Brilliant. Thanks very much. You running 150mm forks as well. What model are they?