fodmtb
Well-known member
Thumbs up for the rear eddy ,well impressived so far with tyre construction and grip . ??
Schwalbe Eddy Current
- Thread starter fodmtb
- Start date
drjarvis2003
Well-known member
im waiting for the front 29 by 2.6 to be released, before i buy a pair.
UKPHOTO
New Member
Which MM did you pair it with?
drjarvis2003
Well-known member
You can't get mm in 29 by 2.6.
Justchillin
New Member
How big does the 2.8 come up i’m torn between which to order the 2.6 or 2.8 as my canyon comes with a 2.8 dhr and doesn't measure much more than 2.6.
All Mountain Coaching
E*POWAH Elite
Yes you can
brunomartins83
Member
Hello, can you explain what happened??
fodmtb
Well-known member
- Thread starter
- #13
@brunomartins83 . Just a normal off piste loam ride , no rocks gardens / sections .
Noticed it halfway through a ride . Tyres only had a handful of rides .
Hopefully I’ll get it sorted
Noticed it halfway through a ride . Tyres only had a handful of rides .
Hopefully I’ll get it sorted
Wilkofire
Member
Was waiting to get a set of these. Where did you get them from? Bit worried about the lugs coming off so easy. Pink bike said the same in there review too
Wilkofire
Member
They must be the only ones selling them. You must ride hard. I fancy trying one on the back
I can’t find a 27.5 front either.... some one in another thread suggested using a rear on the front which personally I quite liked the sound of (in the meantime...)
I'm still amazed that schwalbe doesn't get this sorted, it's been a problem for years with all their aggressive mtb tires. Not enough rubber on the carcass and knobs will peel. It's either QC or they're always chasing weight.
I'll be fitting one this weekend if I get the time. 29x 2.4 front and 27.5x 2.8 rear.
Swissrob
Well-known member
I would be interested in the feedback with 29 front.
Well they're on. The carcass is so much stiffer than the Butchers and the front was a pain to get onto the rim, you wont want to do any trailside repairs with these.
I changed from a 27.5 with 2.8 butcher on the front to 29 with a 2.4 eddy current, the axle height is +1.5cm so not much change in geometry ( not that I'd notice!).
I bought these mainly because the butchers floated at the front on mud, and were reluctant to climb out of muddy ruts, I'll re-post when the ground thaws.
Tubeless at 25psi they roll very well, I'll play with the pressures next ride.
I changed from a 27.5 with 2.8 butcher on the front to 29 with a 2.4 eddy current, the axle height is +1.5cm so not much change in geometry ( not that I'd notice!).
I bought these mainly because the butchers floated at the front on mud, and were reluctant to climb out of muddy ruts, I'll re-post when the ground thaws.
Tubeless at 25psi they roll very well, I'll play with the pressures next ride.
steve_sordy
Wedding Crasher
Assuming a wheelbase of approx 1230mm, then that will give you a reduction in head angle of 1.7 degrees. I reckon that you will notice that! More wandering on the climbs, but more fun on the descents.
Just in case anyone was interested, I emailed Schwalbe and asked them what the deal was with the 29 x 2.6 front. Their response is below.
Our Eddy Currrent Front in 2,6 will be available (in Germany) in the beginning of March 2019.
We ask for your understanding.
My personal thoughts based on what I have seen on here with the knobs being ripped off is that it went back into development but that’s just my opinion and I don’t have anything to substantiate it. Anyway I guess if you want the 2.6 it’s a wait until March.
Our Eddy Currrent Front in 2,6 will be available (in Germany) in the beginning of March 2019.
We ask for your understanding.
My personal thoughts based on what I have seen on here with the knobs being ripped off is that it went back into development but that’s just my opinion and I don’t have anything to substantiate it. Anyway I guess if you want the 2.6 it’s a wait until March.
Mattwilko92
Well-known member
Thanks. Just ordered EC 2.6 rear and MM 2.6 for the front.
Tim29
Well-known member
I have the 2.4, 2.6 and the 27.5 rear.
Personally i wouldn’t wait for the 2.6 front to buy a set.
Buy the 29x2.6 rear and the 27.5 2.8 rear. It’s a way better match then the front.
But paired with snake skin 2.6 magic Mary is the best combo in my testing.
Even the 2.6 Hans damf was better then the front eddy.
The fronts don’t work good at all if there any mud.
2.4 is actually better then 2.6 eddy i think.
I have hammered this rear and no nobby ripping issues like my first couple. I didn’t have to send mine back i just was asked to show proof of it destroyed.
Personally i wouldn’t wait for the 2.6 front to buy a set.
Buy the 29x2.6 rear and the 27.5 2.8 rear. It’s a way better match then the front.
But paired with snake skin 2.6 magic Mary is the best combo in my testing.
Even the 2.6 Hans damf was better then the front eddy.
The fronts don’t work good at all if there any mud.
2.4 is actually better then 2.6 eddy i think.
I have hammered this rear and no nobby ripping issues like my first couple. I didn’t have to send mine back i just was asked to show proof of it destroyed.
I was thinking of going Mary at the front. I’d be interested to hear your thoughts on it.
Tim29
Well-known member
I will add if you have narrow rims 30mm internal or less the 2.4 EC works better then MM.
i find the 29x2.6 MM and Hans like a 34+ wide internal wheel
I run them on a 35 and 38 wheel
On a 30.5 rim both Mary and Hans would roll on heavy g outs and bike act like it cross rutted. You could hear the tire deform on jump face and i could not scrub or turn down on face without feeling as if. I would have bad getoff even at 28-30psi
Eddy front is very sturdy case and works well on 28-32mm rim.
It’s just down right scary on any wet or even slightly muddy surface.
Dry loose hard pack and chunk it works quite well.
i find the 29x2.6 MM and Hans like a 34+ wide internal wheel
I run them on a 35 and 38 wheel
On a 30.5 rim both Mary and Hans would roll on heavy g outs and bike act like it cross rutted. You could hear the tire deform on jump face and i could not scrub or turn down on face without feeling as if. I would have bad getoff even at 28-30psi
Eddy front is very sturdy case and works well on 28-32mm rim.
It’s just down right scary on any wet or even slightly muddy surface.
Dry loose hard pack and chunk it works quite well.
Last edited:
EMTB Forums
Latest articles
-
Bosch-powered Merida is here – the eOne-Sixty SL and eOne-Eighty intro and test
Merida has used Bosch-motors for years, but not on the emtbs. The full...- Knut Nes
- 10 min read
- Views: 3K
- Reaction score: 5
- Comments: 7
-
Bosch ABS Pro and Trail Pro - an interview about the new ABS profiles
When testing the new Bosch Performance CX gen5, we were also introduced...- Knut Nes
- 2 min read
- Views: 5K
- Reaction score: 2
- Comments: 5