Other New Trek full power EMTB about to be launched
- Thread starter Cell4soul
- Start date
Wouldn’t surprise me. Manufacturers are gonna start adding the latest technology to keep up or stay ahead of the new-kids-on-the-block. (Ie; DJI).
Every 6 months or so there will be a new innovation, just like computers, that will make our cherished steeds obsolete. I’m not gonna throw my 6 months old Trek Fuel EXE in the garbage just yet though.
Every 6 months or so there will be a new innovation, just like computers, that will make our cherished steeds obsolete. I’m not gonna throw my 6 months old Trek Fuel EXE in the garbage just yet though.
Those EXE's are cutting edge! Lightweight and balanced range! Heck, I like our pre smart Gen 2 Rails!
Brad
Rando_12345
Active member
There has been a lot of talk of a Bosch motor upgrade, wouldn't expect too many bikes announced on the 4th gen motor...
They have their work cut out to do better than the DJI specs, although I imagine they will match them on weight and power.
They have their work cut out to do better than the DJI specs, although I imagine they will match them on weight and power.
I think that Bosch has decided to postpone the launch of the new GEN4 CX motor ( expected originally for Eurobike) because of the overstock of GEN3.
So I suppose a lot of new models release are waiting for the “ready go” signal from Bosch. This Trek can be one but also the Orbea Wild is waitng…
So I suppose a lot of new models release are waiting for the “ready go” signal from Bosch. This Trek can be one but also the Orbea Wild is waitng…
pagheca
Member
What exactly does "full powered" mean? Just marketing or something specific? And what about "170/170"? Thanks!
Last edited:
over 80nm normally
I guess we’d like to see some sort of class for bike types and power. Manufacturers are all over the map. 55nm to 120nm. I can’t pigeon-hole myself to compare with others.
In the end it depends on how, where, who, when and what I ride.
. So many choices …maybe too many choices?
pagheca
Member
Sorry, now I am even more confused 
What does "55nm to 120nm" mean?
I would be grateful if someone could explain this to a poor peasant with limited experience in this area. Thanks in advance!
What does "55nm to 120nm" mean?
I would be grateful if someone could explain this to a poor peasant with limited experience in this area. Thanks in advance!
I thought it meant the amount of power that a motor has or is capable of.Sorry, now I am even more confused
What does "55nm to 120nm" mean?
I would be grateful if someone could explain this to a poor peasant with limited experience in this area. Thanks in advance!
TQ motor-55nm.
Bosch gen4 motor-85nm.
DJI motor-120nm.
I’m sure wattage and voltage has a factor too.
pagheca
Member
Thanks! I start to understand now: Newton-meter, or Nm.
So, this is a measure of Torque not Power (W)
But... what does 170/170 means then? Is this a class of motor torque?
I am sorry to bore you further with this question, but I would like to understand it completely.
So, this is a measure of Torque not Power (W)
But... what does 170/170 means then? Is this a class of motor torque?
I am sorry to bore you further with this question, but I would like to understand it completely.
I believe this means the amount of suspension (170mm front forks, 170mm shock)
My bikes are 160mm/150mm. The amount of stroke a shock is capable of. 170/170 is too much for me. I’m only 5’9” and 160lbs. If I was 200+ lbs and taller , I might , might get a taller suspension.
I’m still trying to figure out the acronym(s) being thrown around in here …FWIW, FFS, IMO
pagheca
Member
IMO, in my opinion, means... in my opinion
For what is worth, IMO FWIW could mean... For What Is Worth
But I am tired of all these acronyms, for f**k sake!
Or…IMO, in my opinion, means somethingIMO, in my opinion, means... in my opinion
For what is worth, IMO FWIW could mean... For What Is Worth
, in my opinion. For what it’s worth.
LBS…”Lacks Bike Skills”.…maybe? IDK
Paulquattro
E*POWAH Elite
By the way its FFS
fasterjason
Member
50 Nm, 170mm, 580wh, high pivot, mullet
doochenozzle
Member
Trek sub 50 lbs full power high pivot ebike? Considering the Slash is a rather portly 35 lbs without pedals and with a very light tire set, I’m skeptical.
Stoffel
Active member
I cba with acronyms either….
fasterjason
Member
Correct, it's a 50Nm motor not full-power 85Nm, with 580Wh battery.
Bosch SX motor weighs about 2kg and minimal 580Wh battery about 2.5kg. 4.5kg = 10 lbs
DanRides
Member
It'll be a slash exe, with a bosch sx motor, I know a guy that knows a guy
fasterjason
Member
Close, but not quite. I know the guy your guy knows.
EnduroIntern
New Member
Slash exe, tq, 580?
Emailsucks98
Active member
Cool to see new motor MFGs, but established local dealer support is an absolute must IMO.
My partner just picked up a Devinci E-troy lite with the Bosch SX motor. I'm really impressed with this bike- Mullet, great support for the motor, geometry is perfect for us, quiet, sub 44lbs with an alu frame, sensible build and great suspension.
New tech is cool, but I'm more excited to see these great value options and realistic prices.
My partner just picked up a Devinci E-troy lite with the Bosch SX motor. I'm really impressed with this bike- Mullet, great support for the motor, geometry is perfect for us, quiet, sub 44lbs with an alu frame, sensible build and great suspension.
New tech is cool, but I'm more excited to see these great value options and realistic prices.
Similar threads
EMTB Forums
Latest articles
-
Introducing the Forestal e-Cygnus - a downcountry and XC emtb
The new Forestal e-Cygnus is a slightly unusual emtb. It comes in two... -
2025 M1 Sporttechnik EN 8.0 review
The M1 EN is one of four M1 models built on the same frame. Well, it’s...