Has anybody managed to make it fit?
I've tried but it fouls with the struts.
I've tried but it fouls with the struts.
New Orbea Wild with One Up pump on bottle cage
- Thread starter Zave
- Start date
BIG-DUKE-6
Active member
What kind of sorcery is going on in this thread. Fouling? Struts? My beloved Wild?!?!
Forcing it to fit???
OP seek help and anger management. We are here for you .
Sort of…..
Forcing it to fit???
OP seek help and anger management. We are here for you .
Sort of…..
Yeah, those struts really do suck.
I sawed the mount that came with the pump so the remaining part was just a simple "U-shape" with the rubber strap. Then I drilled 2 new holes in it to secure it to the frame.
It obviously wont combo with a water bottle this way, but I'm fine with that.
The only pics I had laying around that shows the pump:
I sawed the mount that came with the pump so the remaining part was just a simple "U-shape" with the rubber strap. Then I drilled 2 new holes in it to secure it to the frame.
It obviously wont combo with a water bottle this way, but I'm fine with that.
The only pics I had laying around that shows the pump:
- Thread starter
- #4
Like an inline mount which one-up now sell. Want to keep the water bottle though
Unfortunately, no.
BIG-DUKE-6
Active member
Isn’t there a bottle cage out there you can mount a pump to?!?! Seems it would be pretty easy with some zip ties.
- Thread starter
- #9
It's not gonna fit the new Wild like that
Yeah, need to see what I can fit and where i can fit it (when the dam thing turns up! )
INLINE PUMP MOUNT – 76 Projects
For OneUp EDC Pump Universal stick-on or bolt-on mounting to the centre line of your frame. Bolt-on - Pop out the slot covers and directly mounts to frame bosses (standard 64mm spacing with 5mm of adjustment).Ideal for the under top tube bosses seen on recent bikes from Forbidden, Deviate...
76projects.com
This is the way.INLINE PUMP MOUNT – 76 Projects
For OneUp EDC Pump Universal stick-on or bolt-on mounting to the centre line of your frame. Bolt-on - Pop out the slot covers and directly mounts to frame bosses (standard 64mm spacing with 5mm of adjustment).Ideal for the under top tube bosses seen on recent bikes from Forbidden, Deviate...
- Thread starter
- #13
Perfect!
Just ordered one. Thanks for that.
Just ordered one. Thanks for that.
So I fitted the pump on the mount on the underside of the top tube. I didn't notice it had fallen off on my driveway until I had got back from my ride (glad I didn't lose it or need it) but now I need to re-stick it, I think because the frame is ceramic coated I don't think the pad stuck enough. (yes I had used the wipe to clean surfaces)
- Thread starter
- #15
The pad part is concaved. Whereas the underside of toptube is flat. I held mine in place with zip ties whilst the glue in the 3m pad went off. So far so good
Top tip that!
Chriso82
Member
just use a bottle rad adapter. On a,azon for £6.00 far cheaper than the wolf tools one. It moves the bottle mount up the frame and then you pump also fits
- Thread starter
- #18
Do you have a photo of it on your Wild?
Nice I was just gonna recommend the Wolftooth B-Rad system which is basically the same thing.
Ark
Active member
Their cable bobbins are awesome too CABLE BOBBINS – 76 ProjectsINLINE PUMP MOUNT – 76 Projects
For OneUp EDC Pump Universal stick-on or bolt-on mounting to the centre line of your frame. Bolt-on - Pop out the slot covers and directly mounts to frame bosses (standard 64mm spacing with 5mm of adjustment).Ideal for the under top tube bosses seen on recent bikes from Forbidden, Deviate...
EMTB Forums
Latest articles
-
Bosch-powered Merida is here – the eOne-Sixty SL and eOne-Eighty intro and test
Merida has used Bosch-motors for years, but not on the emtbs. The full...- Knut Nes
- 10 min read
- Views: 5K
- Reaction score: 5
- Comments: 9
-
Bosch ABS Pro and Trail Pro - an interview about the new ABS profiles
When testing the new Bosch Performance CX gen5, we were also introduced...- Knut Nes
- 2 min read
- Views: 6K
- Reaction score: 2
- Comments: 5