New Bosch Gen 5 rumours
- Thread starter Northman57
- Start date
I don’t get it, orbea wild for example it is non removable per say.
Do you mean you can still remove it?
Rando_12345
Active member
Thy can still change the battery, it is just a longer process, that said a battery easily lasts 5 years (mine was abused over 10000km and still had over 80% health) so at that stage it's not guaranteed the brand will have spares to fit.
I know a guy who was testing the 800Wh Bosch battery on the Lapierre GLP3 (announced 6 months ago, it's an external battery), he was getting bonkers range out of it. As he is a pro athlete it's hard to judge how his range would translate to normal riders, but it seemed like a good chunk more than the standard 720wh.
I know a guy who was testing the 800Wh Bosch battery on the Lapierre GLP3 (announced 6 months ago, it's an external battery), he was getting bonkers range out of it. As he is a pro athlete it's hard to judge how his range would translate to normal riders, but it seemed like a good chunk more than the standard 720wh.
Rando_12345
Active member
They remove the motor first
Okay so it is removable easily but not removable for charging like out of the bike.
Got it thanks.
jbrown15
Well-known member
Tires yes, suspension no. But my current bike is Pole Voima. So not exactly pedal efficient short travel eBike. But I can safely say it gets 15-20% more range than my old Wild.
jbrown15
Well-known member
I’m not quite sure I follow your logic. Suspension platform between those two bikes is not going to make one more efficient with range over the other. If anything the Wild should be more efficient yet the Voima gets more range.
So what’s the issue you have with my answer.
Rando_12345
Active member
This thread is going stir crazy! Let's all calm down, the official release will be out soon enough 
Depends on the money you are going to spend.
For 10k I would wait, you need also to figure out if you need to buy a bike right now close to end of season.
You can always wait for better but here it might be pretty close.
Rando_12345
Active member
Need to wait until monday to have the full picture:
1) Is the new bike much better?
2) Price differences
3) Time to release
That being said, it will be a shame to be receiving the older generation after the new is released unless you got 30-40% off in a sale.
Maybe that applies to bikes in stock. I'm not sure if it applies to the MyO program. We'll see next week, otherwise, I'll cancel the order and wait for the new model...
You could be in the first batch with the Gen 5 if there are no other changes to the wild but Orbea can’t update you until the 30th due to bosch NDA
I saw the new model with my own eyes just yesterday for a brief moment, and I couldn't see any big changes. But I might be wrong and have poor eyesight, so who knows
Yeah, they told me that as well. But in their MyO program, there was no mullet option at that time. And as you said, the frame looked roughly the same...
If I remember the early reviews, they said you could run mullet, but it’s not recommended. I could a lot of people are asking for the option to go mullet so chuck it in as an option with new motor.
You can always mullet a bike but the design of the Orbea Wild might not does not support it.
If there are no flip chip you just hurt the geometry and lower too muchyour BB.
I have on my current bike a flip chip and unfortunately even if it mitigate the BB drop, it does not void it, the BB is still lower and I had tons of pedal strike.
You could mitigate this by placing very small crankarm, but the major point is you loose some power and would need to recalibrate the motor.
This is the part where you might void the warranty.
But I would still want to do it too.
jbrown15
Well-known member
Both the 170/170 and mullet compatible are confirmed.
That seems odd especially for rear travel.
Will buy one right away if I can see it as a mullet!
jbrown15
Well-known member
It's definitely available as a mullet, I believe they will all ship as a full 29er, but there's a link that allows you to run it as a mullet and maintain the geo.
Why do you feel that odd for rear travel?
@jbrown15 because if I am not mistaken it was in the past 160, so if they go with a chip and bigger rear travel they might have either change somehow the linkage (with chip) or a bit the frame - unlikely as way more expensive but it would be his third season.
Then I wonder about the number you talk about, if they are now 170/170, does that mean that it would be possible to do 170/180 - through configurator too? This would becomes a freeride and nearly my dream bike.
Or still fork is in 160 or 170. I am not sure but 170 rear travel would merit definitely a 180 lol
I would have prefer a direct MX sell but let's see.
Then I wonder about the number you talk about, if they are now 170/170, does that mean that it would be possible to do 170/180 - through configurator too? This would becomes a freeride and nearly my dream bike.
Or still fork is in 160 or 170. I am not sure but 170 rear travel would merit definitely a 180 lol
I would have prefer a direct MX sell but let's see.
That looks like a rim valve magnet.
Bosch Performance Line CX Generation 5: Test: Das kann Boschs neuer Mega-Motor!
Die Gerüchteküche hat geschlossen, jetzt gibt's Handfestes! Das ist Boschs neuer Wundermotor CX Performance Line Gen 5 – mit weiterhin 85 Newtonmetern Drehmoment und 600 Watt Spitzenleistung. Warum der CX in seiner fünften Generation dennoch einige "Game-Changer" parat hat, lest ihr in unserem...www.bike-x.de
No thank you.
Like all bosch system no? What is the issue with them except the part they are ugly.
Similar threads
EMTB Forums
Latest articles
-
Introducing the Forestal e-Cygnus - a downcountry and XC emtb
The new Forestal e-Cygnus is a slightly unusual emtb. It comes in two... -
2025 M1 Sporttechnik EN 8.0 review
The M1 EN is one of four M1 models built on the same frame. Well, it’s...