New 2023 Rise..

[gimmick_82]

hi,
can someone tell me if that's normal:
when i stop pressing the walk button there is a noise from the motor which soudns as the rattle when descending...
same noise is hearable when i stop pedaling:
k.r. G

 

[Frankyspec]

Let’s hope this is not for all new models 2023, I have one coming within a few months, m team 2023,normally with the new XTDI2…I have done a test ride for 3 days with M10 2022 and was surprised with the range, 70km 1200hm 95% on eco and only extender was empty!I still ride non e mtb for the moment, but it was a great experience …looking forward to hear more feedback of 2023 owners, I will replace the standard 180 rotors, for 203 rotors, it’s a pity you can’t choose bigger rotors is the configuration anymore …

 

[gimmick_82]

Let’s hope this is not for all new models 2023, I have one coming within a few months, m team 2023,normally with the new XTDI2…I have done a test ride for 3 days with M10 2022 and was surprised with the range, 70km 1200hm 95% on eco and only extender was empty!I still ride non e mtb for the moment, but it was a great experience …looking forward to hear more feedback of 2023 owners, I will replace the standard 180 rotors, for 203 rotors, it’s a pity you can’t choose bigger rotors is the configuration anymore …

Rise m10, 540wH
20eco, 60% trail, 20% Boost,
had 2 bars from 10 left (in the etube app)

 

[texano999]

Let’s hope this is not for all new models 2023, I have one coming within a few months, m team 2023,normally with the new XTDI2…I have done a test ride for 3 days with M10 2022 and was surprised with the range, 70km 1200hm 95% on eco and only extender was empty!I still ride non e mtb for the moment, but it was a great experience …looking forward to hear more feedback of 2023 owners, I will replace the standard 180 rotors, for 203 rotors, it’s a pity you can’t choose bigger rotors is the configuration anymore …

Same order…ma i have changed to ltd for the Delivery …di2 xt moved to september…

 

[Frankyspec]

What I noticed with the motor noise on the model 2022, with higher cadence >80 there is a clear increase of the noice… hopefully with the 801 it will be some better … of the clattering I personally didn’t have any issue, I mean it wasn’t bothering me…

 

[bbkp]

Rise m10, 540wH
20eco, 60% trail, 20% Boost,
had 2 bars from 10 left (in the etube app)

may I ask for rider weight ?
lindkogel ?

 

[gimmick_82]

80

may I ask for rider weight ?
lindkogel ?

80kg without gear.
jap lindkogel!
....so you know the curve shape of the trail well on strava...

 

[Frankyspec]

80

80kg without gear.
jap lindkogel!
....so you know the curve shape of the trail well on strava...

Did you already find a solution for the rattle noise or what’s causing it?

 

[gimmick_82]

Did you already find a solution for the rattle noise or what’s causing it?

no. i think there is no solution.
i think that there maybe some are louder ones and some are more quiet.
orbea will send the "right" motor to the youtubers and reviewers...because their motors are always quiet....
I guess when it comes to weight,.... it will be similar.
Today I rode 36km of trail and I forgot about the rattling. you get used to it.

 

[Tonybro]

There's a thread on the subject on site...

I fixed the Ep8 motor rattle

When I added xt cranks to my rise i left on the e13 chain ring and rubber boot/ring. The rubber ring touches the inside of the crank and creates slight friction if you backpedal. Without the ring (or with e13 cranks) when you go over rough ground there is a small amount of play as the crank...

www.emtbforums.com

 

[Weezerj]

Too lazy to read 4 pages of replies, so sorry if this is just a repeat.....my biggest wish for new rise would be to have universal hanger so I can try out new sram transmission.

 

[gimmick_82]

Hi,
I have now installed a lyric, and on the first ride suddenly the handlebars twisted on a switchback,.... twisted the stem on the steerer tube. I was a bit surprised to find that the stem clamping screws were loose, so i tightend them on the trail. The bad thing is: the screws keep coming loose. I've never had anything like this on a bike or on a stem.
any suggestions?