My 19 Levo base upgrade story

2manytickets

Member
Dec 7, 2018
54
69
California
So now that I finished with all my upgrades and got the bike dialed in to my liking. Here are a few pics of the transformation.

49A7BA50-57D9-4ED4-A645-FC236CFE9239.jpeg


DE319414-E946-483B-A57D-C0487686A152.jpeg


DD213D8E-8D33-45DE-AE83-F1A92A00AD13.jpeg


202C8FF3-968D-4AC2-8F2E-1AEEC4D5247A.jpeg


19642769-315E-4450-91BE-2166DB59FEFA.jpeg


7EA46EA9-ADD3-4293-9C67-D3284F62EC2C.jpeg


830FB066-9B72-47AB-B8D2-68DA1EFDBE2D.jpeg


5EEE9265-0C0A-4FD4-84F5-3BC595EFAA14.jpeg


A8B4D7B0-9378-411E-BED5-F99890A29A18.jpeg


C6EDD343-F578-4AF1-ABB9-FB4148B0D970.jpeg


A4861953-EEBC-48C9-BE8D-D02097CD2C76.jpeg


3E7B5751-598C-4259-888A-834E3A20E3DB.jpeg
 

2manytickets

Member
Dec 7, 2018
54
69
California
I wanted to see if I could save some money by using some old parts and change out some key components to end up with a bike that matched some of the higher end models for less money . I’m an aggressive rider so I knew one of the main things was to upgrade the fork. I noticed there was a lot of flex for my riding style. I just like a solid/ stiff feeling bike so change components out to try and achieve that feeling. Here is a list:

Yari fork with charge 2 damper
I9 hubs laced to derby carbon hoop 30mm
Sram code R brakes f/r
Raceface atlas pedals
Raceface six carbon bars
Renthal 35 mm stem
Der Beron/ der Kiser 2.4 tires
Manic dropper post
And a piece of clear 3m tape to keep all the junk out of my motor case.
 

2manytickets

Member
Dec 7, 2018
54
69
California
did you ride with the original fork at all?
A short ride is all it took for me figure out I would be pushing the fork past it’s limits. I noticed it would flex more than my Yari I had on my old stumpjumper and it didn’t have the plush feel of it ether. So I made the decision to swap the forks out.
 

Mavik

Member
Jan 4, 2019
30
24
Malaysia
A short ride is all it took for me figure out I would be pushing the fork past it’s limits. I noticed it would flex more than my Yari I had on my old stumpjumper and it didn’t have the plush feel of it ether. So I made the decision to swap the forks out.
What travel did you maintain for the Yari? Was looking at a second hand Yari (which also came out of a Stympjumper) and thinking up upgrading it to a Charger 2 Damper as well as the Debonair Air Springs to around (170-180).
 

scipy

Member
Dec 29, 2018
18
15
Sevnica
@2manytickets could you take a picture like the one I'm attaching of the I9 hub on your bike? rear end image request.jpg
So, bike upside down, taken on the non-drive side so that the camera is looking directly at the outer edge of the magnet & weld connecting the dropout and the seat stay. I'd like to see the gap and if my thingamajig might be doable for the I9 hubs.

Thanks in advance :)
 

2manytickets

Member
Dec 7, 2018
54
69
California
What travel did you maintain for the Yari? Was looking at a second hand Yari (which also came out of a Stympjumper) and thinking up upgrading it to a Charger 2 Damper as well as the Debonair Air Springs to around (170-180).
I kept it at 150 mm of travel. After running it for so long I didn’t see a need to increase the travel. But who knows it might be fun to try.
 

2manytickets

Member
Dec 7, 2018
54
69
California
@2manytickets could you take a picture like the one I'm attaching of the I9 hub on your bike? View attachment 10478
So, bike upside down, taken on the non-drive side so that the camera is looking directly at the outer edge of the magnet & weld connecting the dropout and the seat stay. I'd like to see the gap and if my thingamajig might be doable for the I9 hubs.

Thanks in advance :)

I can but it won’t be until this weekend as I am working out of town. What is this thingamajig you speak of?
 

2manytickets

Member
Dec 7, 2018
54
69
California
@2manytickets could you take a picture like the one I'm attaching of the I9 hub on your bike? View attachment 10478
So, bike upside down, taken on the non-drive side so that the camera is looking directly at the outer edge of the magnet & weld connecting the dropout and the seat stay. I'd like to see the gap and if my thingamajig might be doable for the I9 hubs.

Thanks in advance :)
4829073F-92DB-4839-ADC4-DBC1890412F3.jpeg
hope this helps
 

2manytickets

Member
Dec 7, 2018
54
69
California
Noticed it’s been a while since I’ve updated my post. I’ve ridden the hell out of the bike with no issues. I’ve been really happy with my upgrades, fork, tires, brakes bars and stem. I also installed an eagle gx 12spd was able to use BLEvo to bump up my speed limit. Any ways here are some pics. “Ride it like you stole it”
64FA2C23-97F9-4D0D-922D-95045227546F.png
C6F56159-528F-4E85-9EAC-D300E30484DC.png
 

Koo

Member
Nov 11, 2018
74
38
Finland
Noticed it’s been a while since I’ve updated my post. I’ve ridden the hell out of the bike with no issues. I’ve been really happy with my upgrades, fork, tires, brakes bars and stem. I also installed an eagle gx 12spd was able to use BLEvo to bump up my speed limit. Any ways here are some pics. “Ride it like you stole it” View attachment 16912 View attachment 16913
Say whaaat on the bottom picture :))
 

Kave

Well-known member
Dec 9, 2018
242
151
Sweden
Are you happy with your tires? In the wet the standard tires are so bad I can’t believe it. I have been using Continental tires for a long time on my normal bike and I like the we grip from the compound but don't know which tires to get so I consider the Der Baron/ Der Kaiser 2.4 tires as well.
 

2manytickets

Member
Dec 7, 2018
54
69
California
Are you happy with your tires? In the wet the standard tires are so bad I can’t believe it. I have been using Continental tires for a long time on my normal bike and I like the we grip from the compound but don't know which tires to get so I consider the Der Baron/ Der Kaiser 2.4 tires as well.
Yes the tire combo has work out great. I run 26psi front and 28psi rear and they hooked up way better than the butcher ever did. The rear has taken a beating but the front is holding up well. I think I might try a trail king for the rear next.
 

Kave

Well-known member
Dec 9, 2018
242
151
Sweden
Great. In fact I am considering Mud kings since the winter is coming :)
The standard tires are slippery on tarmac even, especially wet tarmac.
 

EMTB Forums

Since 2018

The World's largest electric mountain bike community.

555K
Messages
28,058
Members
Join Our Community

Latest articles


Top