Kenevo Gen1 Kenevo Expert 2020/21 max dropperpost!

[SL76]

Hi everybodys here is Sergio!
I just got last week a 2021 Specialized kenevo Expert...
The bike came with 34.9 x 160mm dropperpost...but seem to be to short for me(183cm)....so the hidraulic part came out of the frame too much.
I call a lots of Specialized shop ,but nobody know witch brand of seatpost can i use....
The dropper post has now 8 cm out of the frame.
Some one know witch brand i can buy/use with 180/190mm of escursion???
Thankz in advance for answer me.
(Sorry 4 my english)
Cheers
Sergio

 

[Zimmerframe]

What size is the bike ?? Che taglia è la bici? (S1,2,3,4,5) ?

@Doomanic you must be the expert by now on which dropper has the shortest insertion length (no personal pun intended ! )

@Christian I think you ground out the frame to get longer insertion when you had one ?

 

[SL76]

What size is the bike ?? Che taglia è la bici? (S1,2,3,4,5) ?

@Doomanic you must be the expert by now on which dropper has the shortest insertion length (no personal pun intended ! )

@Christian I think you ground out the frame to get longer insertion when you had one ?

.

 

[SL76]

What size is the bike ?? Che taglia è la bici? (S1,2,3,4,5) ?

@Doomanic you must be the expert by now on which dropper has the shortest insertion length (no personal pun intended ! )

@Christian I think you ground out the frame to get longer insertion when you had one ?

@Zimmerframe thankz for answer me...i forgot to write it down.
I got the Kenevo in size S4.

Just find 34.9 x 180mm from One up comp. at 220 Euro...or the kingshok 34.9 x 190mm for 170 Euro...but the king shok probably is to long???

Grazie.Sergio

 

[CjP]

What size is the bike ?? Che taglia è la bici? (S1,2,3,4,5) ?

@Christian I think you ground out the frame to get longer insertion when you had one ?

Hey Zimmer, that was the Gen 1 Kenevo. I threw down a 35mm hole saw to cut out the bit of protruding tube from the suspension link bolt tube. Worked a treat!

 

[Alexbn921]

Bike yoke is the best. One up also makes a good post.

 

[Moderator]

Duplicate so locked.

Kenevo Gen1 - Official 2020 Kenevo Owners Thread

Decided it was time to upgrade to NSK Japan bearings. So much smoother and the rear is noticeable stiffer side to side. I expect these bearings to last of 10k+ miles edit: I'm 195lb

www.emtbforums.com