First ride on the 160 and....oops!

Jeffw

Member
Mar 2, 2019
114
76
North West
Hi
Took delivery of my Stereo 160 SL on Thursday and first 'proper' ride yesterday

Riding along one of the trails, now overgrown with ferns in places, and the base of the frame hit a tree stump. Heard a load clatter noise an the motor guard unit was off and smashed :(

Gently got the bike back to the car and as the bike shop was open Sunday, got it back in there. Looks just to be the protective guard is damaged as the motor is working fine. Appears to be no damage otherwise

Anyway...the ride....

Having owned a 2020 Levo Expert previous to this bike, i have to say, the Cube was very impressive. I would go as to say that given the choice of the two, i would opt for the Cube. And at half the price.....

It has the firmware upgrade for the 85nm and the motor was very responsive to any climbs. The narrow bars will take a little getting used to, but i can live with that. I am 5ft 8in and 84kg and i think switching back from 29" wheels to 27.5" made a lot of difference. Cornering was excellent and the bike felt very stable.I went tubeless and changed the tyres to a pair Michelin E-Wilds and again, very impressive and loads of grip

Suspension wise - good but not as plush as the Fox36/DPX2 i had on the Levo, so may have to do a bit of tuning on the Stereo suspension. Not convinced on the Magura brakes, so time will tell if i upgrade them

So will await the cost of the motor guard sleeve. Hopefully not too expensive!
 

Steve940

Active member
Jan 15, 2020
246
171
North east England
I find my brakes brutal,I've never owned a bike with this spec to compare in all fairness..ive only ever owned budget hardtails (£1000range)
Now that saddle is shocking,might aswell be metal ? bars feel okay to me considering my last one was the carbon joystick which were wide but flexy,didnt instill confidence,and before those nukeproof warheads which i absolutely loved
 

Jeffw

Member
Mar 2, 2019
114
76
North West
Looks like the replacement bash guard will be the same flimsy piece of plastic that has already smashed. Seen that RockGuardz do a cover for the 2020 motor - some mixed reviews. Appears it fits on top of the plastic guard on the bike

Found the seat comfortable enough though. 2.5 hours before i hit the tree stump. 20 miles in EMTB mode and only one bar on the battery used (4 left).
 

Steve940

Active member
Jan 15, 2020
246
171
North east England
my battery range is superb which I wasn't expecting given my weight and how unfit I've become,but I do purposefully try to be sparing with it..love mine as you can probably tell,its just so hard to find the time to get out on it..work is sooooo busy at the moment
 

Jeffw

Member
Mar 2, 2019
114
76
North West
Just have to use the Enduro until it gets the replacement guard. Hard work in this current heat, but could do with losing a few kg myself. This working from home for 5 months has taken it's toll. It's getting the motivation to get out. Which the Cube did...until a broke it :)
 

Zudnik

Member
Jul 27, 2020
83
46
NNJ, USA
My 160 gets here Thu end of day. Dangit now I'm finding it even tougher to wait. I was wondering about bash plate down there.... Also worried about water because the main feeder trail by me has 3 stream crossings all only about 5-10 meters wide and all generally about 30cm deep on a normal day.
 

Jeffw

Member
Mar 2, 2019
114
76
North West
Seen a few posts on forums where one hit on the bash guard and it's bust! Think i may look at the RockGuardz protector which sits on top of the guard. Has a tendency to get a load or crap behind it though due to a small gap. May be better than replacing that plastic guard every time i hit something
 

Rosemount

E*POWAH Elite
May 23, 2020
822
1,748
Qld Australia
I have 1st hand experience with Rock Guard for BOSCH Gen 4 .
They are flimsy and not engineered to last . I hit the motor case once climbing uphill over a log and it cracked and fell off !!

When I complained they told me it did its job . :mad:

I explained we ride EMTB in extreme conditions and that the impact that cracked and broke the rock guard was minimal .
Even offered to R&D a better version . They declined my offer .

So no recommendation from me ...
 

TheBikePilot

🎥SHOOTER🎥
Patreon
Author
Oct 9, 2018
928
905
Clapham, London
Think you may struggle to get that Lyrik to feel as plush and perform as you would like, it's not a great damper and you can't upgrade it. It's a very entry-level 'Lyrik'.

The Lyrik Ultimate with the 2.1 Charger is the best fork I've ridden if you can stretch to it. 800mm bars are a cheap upgrade and will change the whole feel of the bike.

We said Mulletting the bike would also make it a total ripper.
 

Jeffw

Member
Mar 2, 2019
114
76
North West
sent my RockGuardz back and they are processing a refund. Simply did'nt fit correctly and was push the side plates of the cover out, which would have opened the floodgates for water and mud. Have instead order the Stand Up product from Italy. 16 Euros shipping and about the same price as the RocgGuardz, but looks a far better fitting. @MitchF has commented on one of the threads also recommending Stand Up cover.

Has been dispatched and on its way.

But i really do wish Cube would fit a stronger motor plate cover in the first place! Quite happy to pay the extra from the outset as so far, i've had to replace the flimsy plate already at a cost of £35
 

Jona

Member
Jan 24, 2020
101
44
Belgium
i thought the standup were sold out, so i made one myself. still need to be painted
1598523849034.png
 

MitchF

E*POWAH Elite
Jun 1, 2019
520
611
Mirokumk38
The stand up pushes the side plates out as well. Water will/may get in but it’s only a cover so it’ll run straight through the bottom drain hole. It’s not a perfect seal even when seated correctly as standard.

my Stand Up plate has taken so many hits , it looks look a robot wars loser, so it’s saved my plastics many times already.

The hits are all from loose rocks, often thrown from the front wheel.
 

Jeffw

Member
Mar 2, 2019
114
76
North West
Stand Up arrived and fitted. No problems at all and has'nt pushed out those side plates, Looks and feels rock solid compared to the RockGuardz (returned and refunded)
 

Jona

Member
Jan 24, 2020
101
44
Belgium
Jona, how exactly did you install your guard on top of the original? Did you use the original guard's bolts on the front or some longer ones? How about the back of the guard?
I used hex spacers in the existing screws at the front, no screws at the back, just some loop and hook tape
Don't look at the mud, I'm just back from a ride

15992387727795866317512376927166.jpg


15992388613793806765535167484954.jpg
 

matt_thebeard

Member
Dec 4, 2020
198
169
south wales
Stand Up arrived and fitted. No problems at all and has'nt pushed out those side plates, Looks and feels rock solid compared to the RockGuardz (returned and refunded)
hi google let me down here would you have a link to the stand up bash guard please? i cannot find anything thanks
 

Jeffw

Member
Mar 2, 2019
114
76
North West
Hi
It was here:
But looks like no longer available
There were several threads on the forum regarding this

 

matt_thebeard

Member
Dec 4, 2020
198
169
south wales
Hi
It was here:
But looks like no longer available
There were several threads on the forum regarding this


hi Jeff,
no worries, but many thanks for the reply, ;-)
my search continues .... edit - i have just found his facebook page and emailed the question does he still produce i will keep all informed

Hello Matt,



Thank you for your email and interest in our StandUp! Protect for Cube Stereo Hybrid 140/160 (no120) All our products are proudly designed and produced in Italy.



StandUp! Protect is answering the need of saving the bottom area of your Cube frame and battery from rocks, stones and trunks found on the rail. StandUp! Protect is made of extruded aluminium alloy 6060 thick 2.5 mm, with anti-corrosion treatment. You can easily install the protect using the 4 original screws in the lower part of your ebike frame (version 2019) and with the 2 original screws plus the velcro 3m dual lock in the back for version 2020/2021.



If you are interested in ordering also the StandUp! MTB Stand, it is made of galvanised steel, corrosion resistant, water resistant (perfect to clean your bike easily with a water pipe once it stands on it), epoxy painted (colour orange) and finished to dry in oven.



Have a look at our reseller website for the latest offers. https://www.idearuote.it/StandUp_products If you need help to choose the right product for your ebike model let us know! Write them about your request and they will offer you the best possible delivery option for your country. The website is in Italian but they do speak English [email protected]



Shipping costs to your country from Italy may be high therefore we do recommend to ask few friends for a collective order so that you may cut them down for over 50% sharing them.



Confident that you will enjoy the comfort and efficiency of StandUp!, we are always here to answer any question you may have!

Best regards,
 
Last edited:

EMTB Forums

Since 2018

The World's largest electric mountain bike community.

555K
Messages
28,072
Members
Join Our Community

Latest articles


Top