Rail (750Wh) Does anyone make/sell pivot guards for the 2023 carbon frames?

[Dave_B]

Like this..

2020-2021 Trek Rail Rear Guard by DeltoroIndustries on Shapeways

Check out 2020-2021 Trek Rail Rear Guard by DeltoroIndustries on Shapeways and discover more 3D printed products in Other.

www.shapeways.com

 

[irie]

Like this..

2020-2021 Trek Rail Rear Guard by DeltoroIndustries on Shapeways

Check out 2020-2021 Trek Rail Rear Guard by DeltoroIndustries on Shapeways and discover more 3D printed products in Other.

www.shapeways.com

This is what we have on our '22 Rails. I've used a small self adhesive Velcro 20mm square on the frame just above the pivot to hold the flap in position.

Post in thread 'Rail rear mudguard' Rail rear mudguard

 

[Dave_B]

Does anyone on here print these?

 

[slomtbr]

Does anyone on here print these?

While you're waiting …
(crafters' foam and mounting tape)

 

[scooby82r]

This solution does not stop debris coing from underneath.

 

[Paulquattro]

This solution does not stop debris coing from underneath.

Depris goes down off the wheel not up
Also you will never stop everything unless you leave the bike at home.

 

[scooby82r]

Depris goes down off the wheel not up
Also you will never stop everything unless you leave the bike at home.

Still finds it way in

 

[JW427]

Does anyone on here print these?

Have one fitted to my Rail 9.7, does its job great...

 

[Dave_B]

Where do you get yours from Jamie? Did you mate print one? Would he be able to print me one?

 

[JW427]

Where do you get yours from Jamie? Did you mate print one? Would he be able to print me one?

Message me you address Dave as I have a spare one. I'll be in Weston Super-Mare over the weekend if you want to pop up

 

[RolfRapRap]

Where do you get yours from Jamie? Did you mate print one? Would he be able to print me one?

Hello - I've had to remove the 3D Print file, after someone started to sell prints based on my design from Trek Rail Pivot Guard, even he accepted the Non Commercial License - please reach out, if you are interested. It's tested on 20 and 21 Carbon frame. 22+ Carbon frame is out for testing

 

[ragnor]

Hello - I've had to remove the 3D Print file, after someone started to sell prints based on my design from Trek Rail Pivot Guard, even he accepted the Non Commercial License - please reach out, if you are interested. It's tested on 20 and 21 Carbon frame. 22+ Carbon frame is out for testing

Interested if you're going to produce some of these. Any idea of the possible cost including P. & P. I'm in the UK

 

[irie]

Still finds it way in

You need a hardtail.

 

[RolfRapRap]

Hello - if you are still searching for solution - this one is now available on Ebay

 

[Germplan]

Hello - I've had to remove the 3D Print file, after someone started to sell prints based on my design from Trek Rail Pivot Guard, even he accepted the Non Commercial License - please reach out, if you are interested. It's tested on 20 and 21 Carbon frame. 22+ Carbon frame is out for testing

Rolf, sorry to here about the infringement. I just got a rail 7 gen 3 and I found your thingiverse and eBay. However, it looks like both are unavailable. Can you share the model or even g-code? Thanks in advance

 

[DTFab]

Hello - I've had to remove the 3D Print file, after someone started to sell prints based on my design from Trek Rail Pivot Guard, even he accepted the Non Commercial License - please reach out, if you are interested. It's tested on 20 and 21 Carbon frame. 22+ Carbon frame is out for testing

Hi, I was wondering if you could shoot me a dm? I am the original owner/designer of the trek mudguard posted in the original post from shape ways I'd be interested to hear who asked you to remove your design since I created the original and everyone tried to copy it.

 

[Balboa]

I just used a piece of innertube. Used velcrotape to get it on and off the frame. Tested it last weekend.....briljant and very cheap