Can you use SRAM brake hose with Hope brakes?

[Dave_B]

Would save me re-routing a new hose through the frame if you can?

 

[Cb750stu]

I don't see why not you would obviously have to change the fittings , barb olive etc to fit the hope brakes ?
I would imagine the brake line is the same size

 

[Dave_B]

That’s what I was thinking ?

 

[RickBullotta]

Should be fine - both 5mm DOT 4/5.1 fluid. The real question is how much hose you'll need to chop off to remove the old fittings and whether it'll be too short afterwards.

 

[Cb750stu]

Should be fine - both 5mm DOT 4/5.1 fluid. The real question is how much hose you'll need to chop off to remove the old fittings and whether it'll be too short afterwards.

The barb is only 5mm long so not a lot ?

 

[Dave_B]

Cheers. The cable is also quite long at the lever end, so plenty to play with. ?

 

[RustyMTB]

Yes you can. The hose diameter is the same, more importantly, I've done exactly that with one of my bikes, V4's replacing Guides & kept the hoses for this exact reason.