I expect with skinny tyres they would, but why ? the geometry would be all wrong even with the flip chip turned too low. The Reign is made to be slack. But hay why not ! It is your bike and you should do what feels best !
I put a pair of 190mm Zebs Ulimates on mine Reign E+0 for a test as I...
Brought my Reign E+0 2022 from the shop 4 weeks ago and it came with the black grommets near the water bottle holder to remove and fit a range extender. Just been the same shop and they have placed the Reign E+0 I bought with a new one and it have no holes for grommets. Also a fork bump stop...
Thanks that look just what I am after. The Reign is almost the same, but no enough to make any difference to the way the guard would fit. Going to google that mudguard now !
So in the UK winter is coming so starting to look at rear mudguard option for my Reign 2022. I am not a fan of the massive ones even though they will keep you ass dry. I have done some Googling and not found much, none Reign specific. So thought I would ask here what others are doing.
I love...
If anyone is interested. Just brought a new Reign E+0 with 750wh battery and out of interest wanted to see if it would fit in my 2019 Trans E+0 SX Pro that would normally have a 500wh battery. Not that I am going to use it on this bike, but I also believe Giant do a different cover to allow...
So I have a 2019 Trance SX E0 and love it, but I cant fit a Giant Battery extender as they do not fit a 2019 bike ( 2020 onwards as the charging plug is different ). So I brought a 250wh non Giant extender and wired is directly in to the + and - on the bike. I worked well for over 2 years until...
I dont think this is just a Giant thing. Most of my mates have Levos. All of them have had at least 2 motors and one brought a Levo Gen 3 for £9k and had to have a new motor with in 2 months ! Another mate brought a Cube. One day just stop with an error for no reason and had to go back tot he...
I had lots of connection issues when I have an Android phone. With an Iphone it seems to work ok. So could this be a phone issue rather than the bike ? Worth a try on another phone.
lee
Thanks
I in the end found to push the longer wires down the bottom of the seat tube ( bike upside down ), can do this to 3 may be 4. So give a little more remove for the rest. I even removed the battery plate and fitted the motor and then thought I would fit the plate after. But that did not...
I have removed the motor twice to fit new bearing. Not an issue and quite a straightforward job. But refitting the motor in to the frame is a major pain in the a@@. There is so little room to place all the wires that the motor is always hard work to align back up with the bolt holes. Am I...
So I have had my Trance for a few years now and replaced the whole drive chain twice. I change from 12 speed to 11 speed a full 12 option was crazy money when they only last 12months. Next time I am thinking that may be I will drop to a 10 speed as they are so much cheaper. Could be Zee or...
I replaced my motor crank bearings as one was ceased and the other was lose/rattling. Cost £27 and I learnt a lot about the motor. It is not as scary as most people think. So dont just go by what the bike shop says and have expensive work done.
Where are you based ? there are a lot of small...
Only just seen this so do not have any photos. But here is the link to the site I brought the bearings from ( both drive side and non-drive side crank bearings ).
Also the second link is the one I watched to show me how to do what I did. He replaced all bearings, all the others were fine in...
Just an FYI incase other have or get a similar issue
I found the problem, both internal crank bearings were on their way out (non drive side was very bad). Also showing signs of rust as a tiny amount of water must have made its way past the bearing at some point. The main gear was also dry so...
I know the 2019 Yamaha motor has always been noisy the higher up the power range you go and the steeper the hill. But I am not sure if mine is getting more noisy. It may be that my mate has just brought a Cube 160 and the Bosch motor is a LOT quieter than mine. So may be it is that and it is all...