Search results

Have a look at offsetbushing.com , put your bike model in and they will tell you what you need. I ordered the below in m6x20mm and its perfect.

I'm 230lbs and run 290psi with 28%sag and 2 spacers. It's super smooth and absorbs big hits and drops like butter. I did use a shockwiz to dial it in ?

You need a m6x20mm. That doesn't look right, it should be flush with the mount. Why didn't you use the one that came stock with DPS?

Lyrik ultimate 160mm 51mm offset. Rode a friends with the fox 36 and just didn't like the feel and we had to put max psi in to get 34%sag.. I was 240lbs geared.

I've a spare kidney if you want to go half's? ?

Do you mean 8.p pads from Magura? If so, they came stock and couldn't get any when I needed to replace them and ended up with 8.R. 8.p are incredibly ?

You sure 230 and not 220? The mt7 pro on 203 MDRP and race pads stop my 17st fat ass pretty hard . Assuming your forks are 180 standard then a 180 to 220 post to post adapter is what you'll need. The rear will need the same .

I'm happy with the current range, just limited to stock. I'll fit the x01 shifter and see how that feels compared to the NX

Hello, Currently I have the NX eagle 12 speed groupset that came stock on the 2020 comp Turbo levo SL and compared to previously having a x01 setup on previous bike, it feels terrible. I've managed to get my hands on a brand new 2021 x01 10-52t derailleur for £100 - bargain! Stock right now...

You'll not regret it, I've final just dialed mine in with the help of a shockwiz, brilliant choice!

There is an internal guide, but I found when changing mine that it was to compact and the brake cable wouldn't budge , hence I had to drop the motor. Its a 30 min job in and out with new cable fitted. Like I mention, be prepared to drop it, but you might not have to.

Be prepared to drop the motor for rear . Make sure you have a bleed kit with extra bleed fluid. Don't use any type of screwdriver to insert the lever bleed nipple / screw, use your finger to tighten because they super easy to round or snap off. Watch a couple videos and good luck ?

It gives you 10mm of extra travel, no noticeable ride height difference or geometry as the difference is marginal, not that I've noticed so far. However I have noticed less pedal strikes with the 160 travel upfront. I run the Fox float X2 factory on rear at 30%sag 210x55 @285psi . I've never...

I couldn't get anywhere near the correct sag at max psi on the 34's so the day after buying a Levo SL is bought the 2021 Lyrik ultimate 160mm 51mm offset. They're super plush and absorb anything I hit with them. I'm 240lbs and run 105psi with 28% sag and have room for another 60psi. They're...

I'm 240lbs all in and found the Butchers hard work setting the right psi for my weight and ride style. I had 26f 28r before swopping the for DHR combo which I now run 22f 25r.

Another Levo seen in the wild .

It might be me or the camera angle but your bars don't look aligned with front wheel ?

I went with 2.3 minions DHF and DHR II. Fitted them today, super easy and look ?

Did you stick with the 2.3?

Hey fellow Levo owners! I'm looking at the over whelming choices for tyres and slightly drowning with confusion. What are you running? Have you moved away from 2.3? If so what differences have you seen? I ride all weather and can't wait to hit some bike parks from April!