Search results

This the only one I've been able to find that uses 5mm Allen, but in USA and shipping to Europe is $15.78. But they should available in other stores, it is a matter of spending some time digging in google Far and Near M20 Crank Bolt Update: Also available in eBay UK: Far Near M15 & M20 shimano...

EW-EN100 has a pushbutton, and according Page 13 of doc: https://si.shimano.com/pdfs/um/UM-72F0A-010-ENG.pdf The function of the button is: Press: change the assist mode each time you press it. Press and hold (about 2 seconds): turn the light ON/OFF Anyway in case of more questions, read the...

I forgot, yes, it is easy to fit, you just unplug the cables remove the display and plug the cables in the new EW-EN100, I believe it includes a couple snap in to hold it to the brake hoses. For this plugging and unplugging it is better to use the Shimano tool TL-EW02, it only cost 2,5€

Probably not, but I do not know for sure. Anyway, as you will remove the display and un-plug the DI2 cables, then you should plug them in the EW-EN100, you do not need additional cables

You are right, the cable comes with the switch and it may not possible to replace the cable alone.

Chsnge the cable. It might have the internal isolation damaged and as a result intermittent shortcircuits between the internal wire and ground shield

Not yet. It arrived to my country the same day the COVID lockout started and mail deliveries are only for essential services, and not for packages, so I suppose it is in the airport warehouse waiting for the lockdown to end and then it will be delivered. Anyway, we are not allowed to use...

Check that the Display and Speed sensor DI2 cables are in the same position as before and they have not been swapped

You have to ditch the SC-E8000 ang install either SC-E7000 or EN-EW100, both are able to pair with the Edge and transmit the motor and battery info. But you can not install both, there must be only one...

These battery parameters: health, cycles and % charge, are only available in eTube Windows PC version, but to connect your laptop to the bike you need the expensive adapter SM-PCE1 which costs around 150€. This information is not available in eTube Android/IOS cell or tablet versions. The...

I Use Stepsunlocker only to be able to read the battery informatio : 1) 28 cycles 2) 98% 3) EC-E6000 charger 4) Battery BT-E8010

Yesterday I sent an email to the seller and I agreed to buy the SC-E7000 that he is selling, I´ll Paypal the money as soon as the seller tells me the shipping cost to Spain. (Nathan, this is Emilio, we have been in contact by email)

Can someone explain to me how to configure GPS Garmin Edge Explore to connect to the Shimano Steps E8000 so that the battery percentage is shown in the GPS, using the DI2 emulation, this is supposed to be work without additional hardware. I am trying, but without success: I turn on the GPS...

SW-M9050 is compatible with E8000 motor, I'd try another cable. To not damage the connector, use the Shimano tool TL-EW02

2100km and no issues with the motor, although the display got moisture inside and was replaced in warranty

The eBay descriptions state left hand because in analog bikes with Hollowtech2, right crank arm is attached to center axis and does not require the cap, it is only required in left side. According Shimano doc, HT2 left and right bolt use the same standard thread so I purchased 2 "left side"...

I believe that Shimano hides this battery health information on purpose. Etube for tablet includes a battery test which only verifies if the LEDS shine, the battery health and charge cycles are not shown. The Shimano reason to hide this information is probably to avoid warranty claims in case...

How do you check Battery Health? I tried with Etube for tablet, but I believe it did not specified Health.

I know this company sells it, but I have not tried it Range Extender Shimano

What do you mean by "display speed"?