Search results

Cheers thanks I'll get the shock owner to measure the eyelet and trunnion mount and I'll compare it with my standard shock ??

Are the bottom eyelets on shocks a standard size ?? Just want to make sure that the pin that secures it to the linkage will fit ?

Current rear travel is 160mm so with the above sum it comes out at 148mm ?

Hi my Orbea wild has a 205 X 65 trunnion shock as standard , I've seen a coil shock that is 205 X 60 will the 5mm less affect anything , it's only 5mm so to me I can't see it would make much of a difference apart from 5mm less stroke ?? Regards Stuart

In step 8 I was surprised how tight the foot stud was , I didn't want to heat it up due to possibly destroying the inner oring and I couldn't seem to be able to get spares at the time , definitely need 10mm shaft clamps or you would never get the footstud off , Also the retaining clip that...

Good idea getting this tool for when you remove/ install the airshaft ? https://www.silverfish-uk.com/products/TOOlS-WORKSHOP/Workshop-Tools/39800657_FOX-FlOAT-NA-2-Bullet-Sealhead-to-Shaft-Tool

Hi do the two cables that go from the motor and controller to the kiox just unplug from the kiox I don't want to start yanking on things and break things ? Going to move my kiox from the bars to the top tube like the Trek bikes ?

I've had the POC joint air VPD one's for two years now and can't fault them , I've washed them numerous times but never go out of shape ? saved my knees quite a few times with big impacts ? they can get a wee bit sweaty but not really noticeable

Ah ok I see it's just the normal way of installing Shimano cranks ?

Yeah possibly ? I don't know much let alone seen the Shimano system is it the same way the cranks are fitted on the Orbea Wild FS with the extraction bolt in the centre of the splines ?? I can't see that the weight of the rider / bike / landing would do that but Im most likely wrong ?

I know e-thirteen have been known to have issues with their crank bolts coming loose (I have had no issues) but isn't that a part of the Shimano motor that's sheared of , theres obviously been a weak point somewhere and the splines were it , probably happened in the manufacturing process maybe a...

I sit on the front wheel facing the bars and slowly let the air out pushing up on the bars helps the forks equalise and sucking down , I'm running zero tokens now after fitting the Luftkappe ? When I stripped the forks there was a lot of grease as per usual from fox , Also you have to take out...

The barb is only 5mm long so not a lot ?

I don't see why not you would obviously have to change the fittings , barb olive etc to fit the hope brakes ? I would imagine the brake line is the same size

26+ miles around kirkhill forest like a man possessed ? mostly tour mode , amazing weather , trails nice and dry ? Furthest ride so far , 14% battery left so the battery definitely likes warmer weather?

Nice bike I've got the 21 H10 and I love it done over 200 miles in a month of ownership ? I'd love to know how folk get that range out of their bikes , I do 20-22 miles 4000-5000ft up n down normally with 15-20 % battery left , I'd love to get 50 miles out of a charge ?

Fox are renowned for being harsh , I've never had anything but fox suspension tbh ? I've never thought they were harsh , I have a 2021 Orbea Wild FS H10 with the 38 performance and I really like it tbh , I had the 36 factory grip 2 on my last bike and was never really happy with it always...

Turned 50 in march never ridden a EMTB always said I wouldn't stoop so low ?? arthritis in my ankle , my left leg is like a bionic one after years of breaking bones racing MX ? Started really struggling on the climbs so I sold my Santa Cruz Hightower V2 and bought the Orbea ? Im wanting to go...

20 miles around Drumtochty today , great weather , quite a bit of snow at the top , ? loving the Orbea ?

XT shifter sold ?