Search results

  1. K

    Coil Shock for Focus JAM2 (Gen1 - Shimano)

    Yeah not arguing about the rubbing :D probably need to get some basic steel spring with narrower outer diameter than the VALT. But before that I might as well grind 1mm off the bottom and ride it until I get the new spring delivered.
  2. K

    Coil Shock for Focus JAM2 (Gen1 - Shimano)

    Actually when it gets compressed it moves further away from the frame.
  3. K

    Coil Shock for Focus JAM2 (Gen1 - Shimano)

    Bumped into a problem :| Cane Creek DBinline coil with valt 2.25” spring and after install it’s touching the frame... what’s the next step?
  4. K

    Focus jam2 shock up grades that fit with tecpack

    Fairly sure there is none, let the air out of the Deluxe and see how close it gets to the tec pack even without a piggy.
  5. K

    Di2 upgrade

    Was just the B-tension screw. All good and working now ?
  6. K

    Di2 upgrade

    Does the mech take up chain slack after it’s setup? Now on 11th gear the chain is just hanging loose.
  7. K

    Di2 upgrade

    So I just fitted a Di2 rear mech. Brings up W032, do I now need the cables and the pc software to enable the electric shifting? The bike is Focus Jam2 2017.
  8. K

    Coil Shock for Focus JAM2 (Gen1 - Shimano)

    Thanks ?
  9. K

    Coil Shock for Focus JAM2 (Gen1 - Shimano)

    Decided to get the dbcoil inline. Now I don’t know what the eyelet size should be, there’s open eye 15mm too but I don’t think that’s what I need. The size is 210/55 with 25x8mm hardware right?
  10. K

    Coil Shock for Focus JAM2 (Gen1 - Shimano)

    Can you still fit a tec pack if you have a coil shock with a piggyback?
  11. K

    E8000 "bottom bracket" bearing play after 1400km

    Shimano has replied the play is within spec (max 2mm) and is normal.
  12. K

    Focus TEC Pack

    Yeah... that kinda sucks though :(
  13. K

    Focus TEC Pack

    Where am I supposed to put the cable on Sam2 when the external battery is depleted? There’s no such hole/recess as the Jam2 has. Backpack?
  14. K

    E8000 "bottom bracket" bearing play after 1400km

    I took the chain off today and if I put my pedals in 12 and 6 o-clock positions and grab the one in 12-o-clock and gently push and pull by the pedal by two fingers there’s an audible clunk and major play. If I get a new engine might swap my focus for a decoy when it’s available ;D
  15. K

    E8000 "bottom bracket" bearing play after 1400km

    Mine’s going to the shop on Tuesday.
  16. K

    E8000 "bottom bracket" bearing play after 1400km

    Some very minor angular play that is hard to tell and the bike slightly creaks/clicks when pedaling hard. Checked all suspension bearings and serviced my pedals and it still does the clicking time to time. I was pushing the non-drive side crank against the frame. Ah well guess I’ll be in touch...
  17. K

    E8000 "bottom bracket" bearing play after 1400km

    Hmm my 4300km Focus Jam2’s E8000 is doing this... normal lateral play or not? Got 7 days of warranty left. Edit: Here’s another video
Top