Wow - what a pita. I did tape a bolt to the button on the battery which compresses the battery on/off when you put it in the frame with some (fleeting) success. Satellite button did turn on, as did display - but only for a few seconds. I think problem now is that button remains pressed by the...
Hello all
Issue with E8000 Steps system on my wife's Canyon Spectral ON (2021). The Shimano Satellite on/off is just flashing when I press it - no other response from bike, screen lifeless. I've charged the battery on and off the bike (Shimano BT-E8035) and that seems "mostly" normal. Although...
Hi there -
H10. Re-used RF vault hubs and laced Sapim spokes with NOBL38 carbon rims. Found OEM RF Turbines a bit flexy. Really like the new set up - a bit lighter and much stiffer. Helps pushing into berms, fins, etc. Looks awesome with anodized brass nipples, matching rim stickers, etc...
So here's one - after 1200 miles or so on my MetaPower 27, the EP8 has begun to fail. Above the normal motor whine, I now have a rhythmic noise in time with the motor that is... loud. Something is wrong for sure - sounds like a bearing and is definitely coming from the motor.
Commencal USA...
Merci! That would be great. Should I send you a separate note to get your contact information?
On the rockguardz - i'm using rubber mastic tape underneath and some extra strong velcro. Stays in place but is already pretty beat up. Cracked several times and had to fix with resin glue and...
Awesome - thx for the pics. I’m gonna check my motor mounts. Noticed a little creak when I start to put the power down. That tool to remove cranks is specific to Shimano motors I believe, not e13 specifically. Glad you got it sorted!
I've had on another bike/saddle. Dirt had worked its way in to where the saddle rails enter the seat frame. Removed saddle and cleaned it really well. Dripped some chain lube into the gaps where the rails enter the saddle frame. Good chance to clean out and re-lub saddle clamp really well too.
Hi all -
Loving the 2021 Sig 27 - she is a beast. Have had a couple of the motor protectors (bash plates) come in second to pointy rocks here in the Pisgah area. Was thinking of adding on one of the custom bash guards from Amygos (company in France) - but unfortunately they don't ship to the...
Absolutely. Works perfectly. Be sure to align the gap in the end of the crank arm with the drain hole in the EP8 spindle (will fit 180 degrees out which blocks drain). The plastic ring/shroud on the e13 drive side crank doesn’t fit the Shimano crank - and it’s not needed. Works great, looks great.
UPDATE --> OK to WAY BETTER. In all fairness - once the e13s were (over) torqued, they did not move much... but, started to creak a bit (which isn't confidence inspiring). Ultimately the fit just isn't that great, and the torque specs are basically wrong... so be careful out there. Shimano XTs...