Search results

Removal of old link was pretty straight forward. Installation of new link was good until I had bolt in the seat stays. I got one side installed but it was quite hard to align - stripped first thread of the bolt. The second side was even harder. Solution is to loosen the rear axle, and if you...

Upgrade box - will eventually report back on how everything goes..

Awesome thanks for the update! Did you have to up your spring rate by 50 or so lbs?

How about now - Got it installed? What's your take on it so far and size of bike + full 29 setup?

Planning my 2024 purchases and looking to get the link too. What size bike are you running? Also did you get the link installed yet with 29 out back? what's the clearance like?

I don't ride very often - bought it back in april 2022 and unlocked it after 200km, still going strong after 1500km! I did suffer from random power downs before unlocking, but I removed the motor and replugged everything to make sure it's nice and tight + no cables were pinched. Didn't have any...

It's happening - no details on it though. Saw this through their IG showing this at the Crankworx Whistler Booth. Below are all educated speculation: + progressivity + travel (possibility, if so, not much) Gen 1 Rise (up to 2022) - should fit both carbon and hydro Gen 2 Rise (2023 edition) -...

I've had both - Vesper Nobl 37 and now Hydra Nobl 35 on my Orbea h30. Vesper: Like any Vesper, there's going to be a bit spongy-ness when stepping on the cranks, but honestly it's not noticeable if you actually ride the bike instead of holding rear brake and cranking. Based on my understanding...

You cant unless you have STunLocker premium, or fully unlocked shimano software (I think only dealer can install this) TBH you won't be losing too much speed ~ 5 to 6% difference between 29" to 27.5" eg. speedometer display 25mph, at 27.5 actual = 23.75 mph

Just the regular ep800 RS. Sorry to clarify - when I was playing with the unlocking firmware, I had the above profile 1 and 2's torque set, Then adjusted power to 350w - flashed back to RS firmware, tested profile 1 flashed to unlocking firmware adjusted power to 500w - tested profile 2. Between...

My H30 540w Rise definitely "feels" full fat when unlocked, this is my current setup: --RS profile-- Profile 1 eco (350w - 29 nm) Profile 1 Trail (350w - 47 nm) Profile 1 Boost (350w - 60nm) --unlocked ep8-- Profile 2 eco (500w - 60nm) Profile 2 Trail (500w - ~75nm) Profile 2 Boost (500w -...

yeah I agree with socalmtb - just depends where you're fun is. I'm 185 and I run 475lb spring, I like the traction and extra travel for the tech stuff I ride. In flowy / jump lines, I don't get more than 3 feet of air (huck to flat) and my setup feels pretty smooth to me. I rarely feel any...

offset bushings doesn't change the stroke of the shock which determines your wheel travel. You will often find that people are "long stroking" their shock along with offset bushings. Going this route really limits the amount of air shock available to you cause you will need to use 216x63 sizing...

Nobl TR35 + Berd Spokes + i9 Hydra.

Not possible without a custom link that changes leverage ratio. Shock is already at max stroke for the size (210 x 55), if 140mm was achieve from a 210x52.5 shock, then yes you have some room to play with.

These type = no, this type = yes as it's a bearing insert that sits into the usual lower eyelet

I knew someone would call that out - it's fully compressed and I made sure by sitting on the bike and bouncing - there was no more give. The bump stock without the spring holder actually shifted over the bottom eyelet as there's a gap inside the bumper that doesn't fully wrap around the shaft...

On my Large frame - no issues here: 29 rear in photo (mullet works too) 216x63 DHX2 with TWO 2mm offset bushings. Please please please dont buy non-brand name after market shocks... you will ragrets.

Me too - I will take the 360 + 252 add on given how much time I dont have to ride.

found some photos here on this thread: Orbea Rise Drive Side Crank Arm Rubber Boot ironically I dont think mine ever came with the boot.