Has anybody swapped the brakes on the 2020 Kenevo themselves? Is it a difficult job? Does it require the motor to be dropped or can the hose simply be fed through?
Lazy question but does anybody happen to know the max insertion length of the seatpost on the S4 Kenevo? Just looking at the 180 and 210mm OneUp droppers and wondering if I could get a flush fitment.
Had exactly the same happen to me on an old set of Zees. Couldn’t find a leak anywhere and the issue happened on both the front and rear callipers. Drove me insane. Changed pads / rotors / rebled a million times. In the end I gave up and switched brakes.
Glad I stumbled across this thread as I...
3 or 4 rides in on the Magura MDR-P (F 220 / R 200) rotors and SRAM Code R (with new Trickstuff pads) brake combination and I have to say I’m not loving it.
Still get the warbling I had before and not really noticed any improvement in their stopping power.
What also bothers me is a metallic...
I was cleaning and lubing my chain earlier using the allen key backpedalling method but found that the bike kept turning itself on and flashing red and blue error lights. Is this normal or something to be concerned about?
Anybody else find the stock Butcher tyres lethal? I find the front washes out often and makes for a very nervous ride. I am still running tubes, so can’t go super low with the pressures but I’m still very surprised by the poor performance.
Are these bad tyres or could it just be that I’m...
He’s had it since the 2019s came out. Has a lot of miles on it and it’s never missed a beat from a reliability standpoint. But it just does not drop down low enough. The mechanism means it stands quite high above the collar and with the raised saddle nose from the tilt he finds it a bit of a...
Thanks for the info. It seems the Brand X is 40mm longer than the AXS, so it might protrude a bit, which would make it a nogo. The AXS looks great but the price puts it out of reach.
Also, does anyone know the post length of the Command Wu that comes on the Medium 2019 Kenevo? He is of course hoping that the 150mm Brand X fits flush into the frame.
Question with those out there on the 1st gen 2018/2019 Kenevo. My Dad is looking to upgrade his dropper post from the strange tilty stock thing to a 150mm Brand X (he’s on a medium frame).
Anybody done this?
The brand x only comes in 31.6mm. From looking online it seems that the Kenevo is...
How much play (forward - backward not side to side) is acceptable on the front hub with the front brake applied? My Kenevo has quite a noticeable ‘rock’ (similar to a loose headset but coming from the front hub) and I’m wondering if the bearings are ok. Bike is pretty much new (~100km) but I’ve...
Can someone point me in the right direction for the adapter needed to run the SRAM Code Rs with a 220mm rotor on the RS Boxxer?
I’ve tried a Hope +20mm one that I originally bought to use with my Hope E4s (HOPE Adapter Model P PM-PM +20 mm | 220 FW black, 17,50) but it leaves the Code caliper...
So, after a quick trial fit of my Hope E4 front brake on the 2020 Kenevo Expert, it became quickly apparent on the first ride that the E4s unfortunately don’t have the bite for this beast.
What brake setups are others running on the 2020 Kenevo? I wasn’t too happy with the Code Rs in stock...