Search results

At the moment not available in PlayStore. If I understand correctly though, this app requires a special device. You can read more here: Bafang Electric’s New IOT System Delivers a New Level of eBike Connectivity and Interaction – ebikes Int'l

Yes, it did support those features only with this firmware. Bafang_M500_M600/CRX10NC4814i101003.0-28-2230-boot3.0-20220628153910.bin at main · OpenSourceEBike/Bafang_M500_M600 But I wasn't able to use the advanced tuning features from my previous screenshot

I believe this is correct. I personally was able to run it on rev e and for sure m500/m600 doesn't support...

Looking for advice. Has anybody tried to use MegNeg with their Rs shox on dengfu E10? Would love to hear your feedback. I am currently running a Rs deluxe 210x55. I keep my sag at around 30% with my 90kg weight and use max bottom out tokens. I haven't felt many harsh bottom outs, but very...

Btw, does somebody know which kind of chain guards is m510 compatible with?

I was actually referring to this screen

Hey guys, let's stick to m510 in this thread so that nobody gets confused.. And in regards to that, did anybody manage to use successfully the individual level adjustment function in the new(1.30) besst pro?

Today I have reprogrammed the motor and set the acceleration parameter to minimum. I tested the bike briefly and tbh the motor still feels jerky, especially at level 4 and 5. Not sure if there is a difference with my previous setting (5/8). Maybe this parameter cannot be overridden on my fw...

Good review of configuration. I was able to use this feature of best pro with my rev1 engine that I bought of @ficorama. I am still trying to figure out which level of acceleration I want on the motor. Currently I have it set to 5/8 but I find the motor is a bit too jerky in the higher(=>3)...

I agree, but lower PAS1 can be very important, especially for those doing long distance rides.

So if you change the 'current' parameter via besst pro for each pas level does it sort of overwrite the initial setting of a particular firmware? I like the idea of having more tunability instead of just using a particular fw and hoping it will suit well for my needs...

So what happened to besst pro? Did somebody get it from @Mirkoser? Really interested to try this, as such tunability is exactly what I am looking for...

By the way, does somebody know what exactly does AI sensitivity setting do on M500?

So guys, what's your favourite m500 48v firmware for trail riding? I think I've liked the 12a best out of all due to a good power ramp up(gives power earlier). The only issue I find is that even in PAS1 It's consuming way too much power, especially if you're going over 25-30km/h. Went to try the...

A question about m500 firmware: what is the difference between the two 10A firmware(2015.5 VS 2050.6). The first one is stock and feels kind of sluggish.. How does the other one compare to it? Currently using 12A and I like the snappiness of it(comparing to 13a) but I would like level1 to be...

Can somebody advise how to measure battery voltage with the battery being outside of the frame? In other words how to bypass the on/off switch?(battery outside of the frame)

Seems that the issue is within the battery itself - either a voltage disbalance or faulty BMS. I will have it checked by an expert soon, who will also be able to balance it out if need be. In the meantime also considering to try m600 due to lack of performance from m500. I do use appropriate...

I was riding in fairly dry conditions and I am sure that water ingress is not the issue. I also doubt the issue is in any of the connectors, but I will double check. How to make a discharging device to check the battery? How can you check if there's voltage in the motor? How is your battery...

Thanks for the advice! I have tried but still loses a lot of torque as soon as the cadence drops. Another question - are you able to read the original dengfu battery using the BESSt tool? I have a strong suspicion that my battery is faulty. It's been acting weird since day 1... Now it...

I have a question regarding calibration. I saw some folks in youtube were calibrating the m600 after installing a different firmware. Today I have installed the 13a firmware but saw no such option. Could this be related to m500 or maybe to the besst version(1.2.18) I am using? Is Calibration...