Search results

i have been using the first gen for almost 15months and its not a deal breaker. Its still a capable motor and plenty of torque. I use it for offroad singletrack riding and it’s wonderful. The video with the noise from the motor has the mic placement near the motor is not realistic. The noise...

Its 500w somebody has this OTA and supposedly with reduced overun

Latest firmware from Chili

My C245 resetted to 0km for no reason and now i dont know If i can revert back to previous log.

Is this compatible with the 500w controller?

I i have the BEEST

I want to test the motor, let me know when is your next riding time?

Looks like Kiara. I wanted to try the m820 and i have the m560. Lemme know your riding time?

Does it means any coil shocks will mount without any interference?

Have to do the twice on different Besst. Set speed to below 27 and adjust parameters on Pro. Exit and proceed to old beest to raised speed. Its PITA but thats the only possible at the moment. Unless you have a superuser account login.

I think basic parameters can only be altered using the Besst Tool. Cycling parameters is not so restrictive.

you need to be online login either with a dealer login or via python bypass script

Replace it with a non QR axle. It secures much better and easier to remove wheels

It also increase the ramp up at 0 degrees which is extremely annoying. You won’t be able to ratchet your crank like an analogue bike when experiencing a rough uphill switchback on the trails

0086 18115033202. You can whatsapp her.

Changzhou Fieldebikes, Chili/Anna Shen

Can you check whether the basic parameters can be set above 25km/h and at the same time adjust the startup angle?

Noted. The overlapping colors of PAS 1-3 was not showing well and also the support level for Pas 4 & 5 was not indicated. Thats why it was confusing.

I believe there should be a better way of explaining this. The curves does nothing to me

You could be right. Its probably the support level between PAS which is inconsistent. From my M560, i found out that if I set the same support level for PAS 1 & 2 it produces a very linear and smooth transition.