Search results

  1. M

    Noisy Shimano brakes when wet

    Morning All. I have a 2021 Cube stereo hybrid 140 AT The Shimano XT brakes are generally fine for me but they make a right noise when wet! Any suggestions for replacement pads to alleviate the racket? Cheers
  2. M

    Thule Compact rack versus XT

    Do you attach the bike rack to a tow ball on the back of your caravan? I have a Thule velospace Xt which is a good size for e bikes and because the channel for the bikes is continuous- makes it easier to get the bikes on
  3. M

    Rerouting cables after headset change

    Thanks MrPeaski Funnily enough I ended up doing similar- I’ve got right side - gear cable and kiox. Left side - rear brake hose and dropper post.
  4. M

    Rerouting cables after headset change

    Thanks very much! I have fitted the superstar cups in the headset this morning - the “cables thru headset” is not very well engineered. The top bearing is the same size as the lower despite the thinner steerer tube at the top. The difference between the id of the bearing and the steerer tube...
  5. M

    Rerouting cables after headset change

    Thank you for that Would you be able to tell me which exact cables go through each side please? I’m thinking dropper post cable goes across to the right side as does the rear brake line? And the gear change cable goes to the left side with the kiox cable? Cheers
  6. M

    Rerouting cables after headset change

    I have a 2021 Cube AT which came with the cables routed through the headset/spacers. I’m putting on a Superstars headset and need to re-route the cables like the 2020 model. Where can I get the side plates with the holes in and also the backing plates. I know ebikeprints do the outers but...
  7. M

    Crank length - 165 v 155

    Thanks for the info! It‘s just 155 seems a bit short after riding 170 on a conventional mtb
  8. M

    Crank length - 165 v 155

    Some advice please. Changing the cranks on my new Cube to Hope - should I stick with 165mm or go to 155mm? The 155mm seem short to me but are they any good?
  9. M

    Bosch motor guards

    I’ll take one please
  10. M

    has anyone tried these handlebars?

    And I thought motorsport was expensive!
  11. M

    All mtn 7. Ridden 38 times... And now this..

    Not sure about the “bad owners” bit! Maybe poor design of the new tech - probably need more e bike specific drive chains - beef them up a bit! There is a lot of rider beta testing going on....
  12. M

    All mtn 7. Ridden 38 times... And now this..

    I have a Cube coming and as I said, I‘m not very confident that it will be trouble free. My point was that the purchaser should not have to be constantly maintaining the bike but that is the current situation. You shouldn’t really have to be ordering spares for a new bike although I have...
  13. M

    All mtn 7. Ridden 38 times... And now this..

    I think Boots is an honest guy just trying to make little interesting videos for you tube. As he says, he doesn’t have a lot of mechanical knowledge - like most of the population and the number of people like this will increase because e-bikes are being bought by “normal” people because they...
  14. M

    Bosch gen 4

    Thanks very much - would you happen to know if the Cube stereo hybrid 140 HPC is boost or non-boost? Cheers
  15. M

    Bosch gen 4

    Can anyone tell me what the “boost“ bit means with respect to Bosch gen 4 motors please? I want to put an aftermarket fsa spider on so I can use a wolftooth chainring - just want to get the correct spider Cheers Alll
  16. M

    Bosch motor guards

    Please could you let me know when you have the next batch ready. Cheers
  17. M

    Haibike Allmtn 6/7 upgrade

    Hi all, is the chainring nut on the AllMtn 7 left handed and best place to get the socket/remover? Cheers
  18. M

    Getting your emtb on a work stand with ease

    Thanks very much
  19. M

    Getting your emtb on a work stand with ease

    Where do you get the fake crossbar please?
  20. M

    Haibike Allmtn 6/7 upgrade

    Does anyone know what tool is required to remove the crank nut on the Yamaha paw-x2?
Top