In terms of height not distance. No?
But this is really my point. There’s nothing I’m doing outside the manufacturers spec
Fully aware of the 24 bikes upgrades
Esp the rear end so some form of flex is to be expected, however it’s viewed, the bike is within spec as is the rider weight...
I don’t mind his first post, I do mind repeated reams of keyboard battering on basically the exact same loud mouthed pig headedness. Oh could we have another picture of an orbea rise please? Like we don’t know what one of those looks like, (it’s hanging up in the garage) 🛎️
Plummet. Will you please just fuck off! You made your point umpteen times, I’m not interested in your opinion …. I would like to hear from other people. If you want to start a thread of your own please do, leave mine alone.
The intention is to go with a cascade linkage arms and get the pre load spacer. But that would still leave the seat stays and chain stays. The only oe rear end bits left
Check the rear triangle after ever ride.
The give an idea , bike park wales, puppty ping, start pushing to clear those...
I could accept a sensible reply like fit the rear stays off a 24/5 bike
But having already said I’ve changed the suspension and wheels to then bang on about changing suspension and wheels is frankly moronic key board warrior syndrome. Total bell 🛎️
No the bearings themselves are a standard size, the theory here is the rubber seal needs 10nm to compress it before the bearings can not move in the frame cup. Put another way, if the owner just does the head set up by feel like a normal head set without the rubber seal, the seal will allow the...
I don’t agree on the light e bike principle that they are all weak purely due to the light weight. That’s due to the low battery weight and in turn dictating lower power, both of which I want. I want to work harder on the bike and have less weight to throw about. It keeps up with full power...
Jumps aren’t that big as I can’t get beyond this issue. The rise system weight might be the issue but…. The reason for looking at the rise in the first place was that it was a lightweight ebike that DID fit my weight. Most other bikes quote a total bike and rider where orbea quote a rider weight...
I have a canyon strive and it’s not an issue. I do see what you mean jumping that as if trying to hard it can easily go squiffy but that can be either way
The rise always seems to have to correct it back from the right mid air. It’s not inspiring confidence. It’s an xl I’m 6’2 and 19 stone. I’m...
I’m having trouble getting this jump straight. Just me?
It’s 22 model h30 with upgraded fox factory suspension front and back and dt swiss wheels.
It’s like the back end unloads and the bike always seems to move to the right at the back … the harder you pull the worse it seems to get.
Check the blue paper, but I saw a post elsewhere that gives 10nm for the head set bolt due to a binding head set seal that presumably needs to be compressed or the head set is loose.
Certainly I’ve had issues with my 22 model knocking on the brakes even though the head set bolt “feels” tight in...
Crank brothers stamp 2 here large. Size 12. They do have pins rather than studs I find the pins actually stick into the soles of 5 10 shoes so I use ride concepts shoes with them.
Can probably screw the pins an a bit
As said, what defines an Enduro bike? Could you answer that ?
Because As Big says unless it’s a downhill bike they are almost all class 4…. And did you know, orbea ran a wild frame in the last World Cup downhill event in Poland but without the motor and battery !
So to answer your last...