What tool are you planning to use to do this? I'll also want to make holes in my e82 frame. From what I know HSS (high speed steel) drills are not recommended as they can easily damage the fibres in the carbon fibre. Instead, it is better to use carbide or diamond drills as they are more...
The bike is very nice to ride. It feels short compared to my exess. While it is useful in the mountains, it is less convenient on asphalt roads. I feel very confident on descents, the wheel does not slip away, the weight is well distributed. As for the rear suspension, it also works well with my...
Display and speed/shift sensor cable goes to left and then up in my case, there's some space, not that bad. Battery cable needs to be bent quite strong.
It would be good for someone who has a model of this engine with a new sticker to disassemble it and post photos of the gears and rotor in order to compare whether they have actually changed anything or maybe their advertising slogans such as new version from February, new version from May are...
Yeah, I can do this with my m620 uart version and eggrider.
You can set speed limit as you wish by besst (not besst pro) with bafang engineer account. Have done that with my m560 already.
I opened and re-greased the engine with Mobilgrease 28. This factory grease changed its consistency from thick to more watery and it seems to have separated. Lighter and darker layers of grease were visible. I am attaching photos to compare the gear shapes.
Yeah, for me this information is also unclear and a bit inconsistent.
Maybe a new gear will be available on greenbikekit soon? Or maybe i already have this new one on my motor? :)
The next time I remove the engine from the frame, I will lubricate it with Mobilgrese 28 grease, just like I...
I tried to repeat the overheating situation on the road but nothing happened. Motor was warm. Maybe the problem was actually caused by a sudden stop after a long uphill climb. Max output is below 1200W, on throttle it's about 1170W.
I ordered my motor from Chili.
It seems to me that the engine...
After a long uphill climb and a 10 minute break, after starting the route again, the engine started to stop working, error 10, controller overheating. During the climb, the power reached a maximum of 800W - this is how I limited the support mode. The M620 on the same route at a higher climbing...