tedturbine
Active member
I don't either and I wear adidas trainers to ride but the fear of doing it is real. I do tend to get the odd bite when standing over the crossbar and moving the bike around to open gates etc
Not sure why they are only sold here, so you can't anything Entity in the UK?
I just can’t seem to understand how people keep destroying their shins with pedal gashes ?
I must be doing something wrong. I’ve only managed to do it once, and that was because I was wearing riding thongs, and my foot slipped out of the footwear.
Like really, you wear 510’s and have big grippy pins on the pedals, how do you even slip a pedal ?
Oh shit, it makes sense now ?This is the man who can clench his buttocks with such force than he can actually destroy a saddle !
That's a shame that they are that much Zim, doing a quick conversion from Euro's to Aussie dollars, it's exactly double. No wonder you guys want to get out of Europe again.
It’s going to come down to your budget by the sounds of it. So what is your budget ?I've only found the one place so far, so the markup could be just scary by that seller . I think you can buy them directly and they'll ship world wide.
Just trying to weigh up all the pro's / con's of the suggestions ..
The DMR V12 Mags came up quite cheap, but after researching they get some poor longevity reviews on the bearings ... probably why they're so much cheaper than the Vaults !
I quite like the idea of the composite ones, the chesters .. but I like all the others too ..
The DMR vault magnesium's with the Ti axle are probably the best for my abilities to give me that extra millisecond .. sadly, they're out of stock ..
Well done for finally making a decision ?OK ... decision made !
The winner is .... Raceface Chesters....
I quite like the idea of the composite pedals, the extra shock protection as @Beekeeper mentioned for instance, tiny as it may be.
Also, were a bargain at €37 for the last pair, so I won't cry too much when I scratch them ..
@outerlimits Wasn't really a budget set, more down to value for what you get and what people who've used them recommend and have good experiences with. In fairness it wasn't easy deciding as I like the design and specification of all the ones recommended. I don't have 500 years of riding experience behind me to know what degree of concave or pin pattern works best for me .. But I do have 5000+ combined years of riding experience available on the forum to see where a good place to start is !
Looked at them but stayed with clips. Might try a set on my other bike for a while.Something like this Rusty? Cheap as chips at $65 Aus and only 300gms for the pair. Been faultless so far and being so thin, less chance of pedal strikes
Well done for finally making a decision ?
But can I just recommend one more thing ...
Get yourself one of these to put on your bars to keep you company as you ride along. You can talk to it as you ride along and it will reassure you that you have made the right decision. After all, it too is plastic, and one can never have too much plastic on their bike ?
View attachment 20500
Look, I got one coming, as I need all the reassurance I can get, and need something semi soft on the bars I can smash my forehead into on occasions. He will be named ”Flamin Ducky McDuckface”I'm pretty tempted by one of those .. I think they have a little light too .. the best thing is that if someone really pisses you off, you can drop one and unoffensively shout "DUCK OFF"
what are you even talking about?
I haven't actually recomended any pedal.
Whereas the only reason you've given for your recommendation of the One-Up composites is and
this tells us pretty much nothing else about the actual pedal, just that you don't have the foot eye co ordination or timing to not pedal into things. It's actually pretty funny that you genuinely believe that extra 2.5mm of clearance is bailing you out. Especially when you admit to ie. not having yet attained the skill to keep your feet on the things.
No matter how weak, at least you did bother to give a few reasons for your pedal choice.There's really no need to get wound up by my words or resort to personal insults and calling folk names just because you can't handle hearing the truth.
Lighten up, eh?
(or light up, whatever works)
OK ... decision made !
The winner is .... Raceface Chesters....
I quite like the idea of the composite pedals, the extra shock protection as @Beekeeper mentioned for instance, tiny as it may be.
Also, were a bargain at €37 for the last pair, so I won't cry too much when I scratch them ..
@outerlimits Wasn't really a budget set, more down to value for what you get and what people who've used them recommend and have good experiences with. In fairness it wasn't easy deciding as I like the design and specification of all the ones recommended. I don't have 500 years of riding experience behind me (like Gary) to know what degree of concave or pin pattern works best for me .. But I do have 5000+ combined years of riding experience available on the forum to see where a good place to start is !
Dam you... I now have to get another duck, and name it Gary, ffs ?I see your still stuck in the non e-bike era , where you had to conform to all the rules of crank length verses leg length and some other sort of wanky formula to compute where your seat and handlebars need to be. You know what, all that goes out the window when you have a motor assisting you .
Now we can enjoy pedalling through stuff or even low and behold, around corners (because we like to ride fast) all because we can have shorter cranks and thinner pedals .
Pretty sure I didn't admit to not having the skills to keep my feet on the pedals, that's just you trying to justify your argument . I've had heaps of pedal strikes and bark off my shins, very rarely do any of my pedal strikes happen at the bottom of the stroke, they happen on skinny gutted tracks that have large rocks encroaching on your line, when you travel at speed on the tracks I ride then these things are going to happen but yes all the ground clearance I can create is a bonus for those times I want to pedal through washouts/g-outs or up a 20 metre 70º rock strewn goat track step up .
I enjoy reading what components other people have fitted to their to their bikes or if someone is after an opinion, good or bad and especially if the post is heavy with pictures . You on the other hand have a tendency to demean most posts and opinions that you weigh in on, usually insulting people about their lack of skills or knowledge and then you post a long winded protracted and boring post of your experience and skills, most of which I never finish because they're...well...so...bloody long (and boring, oh I said that already) .
Oh and here's a few more winks for you because I know you like them,
P.S There's no point replying because it will be too long and boring for me to read
I’ve been riding flat pedals for the past 5 years, and I guess apart from those first few months I’ve only had few encounters of pins vs shins. It usually happens when not on the bike but when handling the bike. Good flat pedals with grippy pins and FiveTen’s works. I think it’s merely a matter of technique to get the pins to get a good bite at the shoe sole.I just can’t seem to understand how people keep destroying their shins with pedal gashes ?
I must be doing something wrong. I’ve only managed to do it once, and that was because I was wearing riding thongs, and my foot slipped out of the footwear.
Like really, you wear 510’s and have big grippy pins on the pedals, how do you even slip a pedal ?
Yes I wouldn't call myself skilled in the true sense or any sense really but the pins have so far only gripped my knees while walking the bike. Actually only a few spikes so far but they were nice deep ones.It usually happens when not on the bike
I just can’t seem to understand how people keep destroying their shins with pedal gashes ?
I must be doing something wrong. I’ve only managed to do it once, and that was because I was wearing riding thongs, and my foot slipped out of the footwear.
Like really, you wear 510’s and have big grippy pins on the pedals, how do you even slip a pedal ?
So you got to feck up fairly often or walk beside your bike like your drunk then.It's pretty easy if you f*** up a jump or a trick or while learning the proper technique.
So you got to feck up fairly often or walk beside your bike like your drunk then.
Don’t get me wrong, I crash plenty enough, just don’t cop pedals to the shin. I did have a sharp rock pierce my shin once and ended up with 2 stitches. That was enough to keep me away from sharp objects.exactly
It's the "shit in - shit out" principle. Shitty technique >> shitty looking shins.
TLDRI see your still stuck in the non e-bike era , where you had to conform to all the rules of crank length verses leg length and some other sort of wanky formula to compute where your seat and handlebars need to be. You know what, all that goes out the window when you have a motor assisting you .
We can now enjoy pedalling through stuff or even, low and behold, around corners (because we like to ride fast), all because we CAN have shorter cranks and thinner pedals .
Pretty sure I didn't admit to not having the skills to keep my feet on the pedals, that's just you trying to justify your argument . I've had heaps of pedal strikes and bark off my shins, very rarely do any of my pedal strikes happen at the bottom of the stroke, they happen on skinny gutted tracks that have large rocks encroaching on your line, when you travel at speed on the tracks I ride then these things are going to happen but yes all the ground clearance I can create is a bonus for those times I do want to pedal through washouts/g-outs or up a 20 metre 70º rock strewn goat track step up .
I enjoy reading what components other people have fitted to their to their bikes or if someone is after an opinion, good or bad and especially if the post is heavy with pictures . You on the other hand have a tendency to demean most posts and opinions that you weigh in on, usually insulting people about their lack of skills or knowledge and then you post a long winded protracted and boring post of your experience and skills, most of which I never finish because they're...well...so...bloody long (and boring, oh I said that already) .
Oh and here's a few more winks for you because I know you like them,
P.S There's no point replying because it will be too long and boring for me to read
Did you not read my reply ??? or was it too long ???Too long don’t read?
The World's largest electric mountain bike community.