what tools did your 160 come with

[Zudnik]

My 160 TM shipped today so should be here in about 5 days. Curious what tools yours came with. Did it come with a shock pump and torque wrench? It's shipping from Fly/Ride in LA so hopefully they didn't stuff any Rona in the fork lol.

 

[Zudnik]

Either nobody got a cube 160 and/or nobody got any tools?

 

[Steve940]

Picked mine up from store,comes with zero extras unless you buy them..online buying may be different,ill assume they'll send only what is needed to get your bike rideable....the bare minimum

 

[KeithO]

Either nobody got a cube 160 and/or nobody got any tools?

I got a yellow plastic thing to put in the caliper when transporting with a wheel off

apart from that - nothing! ?

 

[Rosemount]

Picked mine up from store,comes with zero extras unless you buy them..online buying may be different,ill assume they'll send only what is needed to get your bike rideable....the bare minimum

+1
If you have Magura brakes budget for a bleed kit ...

 

[Steve940]

+1
If you have Magura brakes budget for a bleed kit ...

Brakes been great so far but it is very early days.im back to normal.at work which means I'm away from home quite a bit so mine overall should have a fairly east life compared to some..if this is a common issue an it happens ill probably switch them out

 

[Jeffw]

Picked mine up from my LBS yesterday. No tools, did'nt expect any. Crap pedals, so they've been binned already and replaced by some Burgtec's off another bike. So will start a pedal hunt this weekend

 

[MitchF]

160 HPC TM ‘20 - 4A charger. No pedals, multi tool and axle cone spanner.
Never had to bleed my Magura’s

 

[Steve940]

Picked mine up from my LBS yesterday. No tools, did'nt expect any. Crap pedals, so they've been binned already and replaced by some Burgtec's off another bike. So will start a pedal hunt this weekend

I went with shimano saints,they were heavily discounted at the time..good grippy peddle

 

[Steve940]

160 HPC TM ‘20 - 4A charger. No pedals, multi tool and axle cone spanner.
Never had to bleed my Magura’s

I got the poxy 2a charger..never mind

 

[Jeffw]

Yes, Compact Charger here also. Nearly 7 hours to charge - but i can live with that

 

[Rosemount]

160 HPC TM ‘20 - 4A charger. No pedals, multi tool and axle cone spanner.
Never had to bleed my Magura’s

Got lucky ...
Mine were back to the shop 3 times ! Reading the net it was the same story world wide .

Another tip if you move the seat post up or down you may need to adjust the dropper post cable where it exits and re enters the frame .
I moved mine and then the dropper began to sag slowly . Turns out if you don`t feed the cable in or out depending on which way you move the post . It will put extra tension on the dropper mechanism and allow the seat post to drop when you sit on it . I moved the seat clamp / post again and fixed . It was frustrating on the 3 hour ride I took it on while it was not operating properly .

Best wishes with your new steed . I am thoroughly enjoying mine .