Watts in Bosch flow app. Is it the rider output total or the Bosch motor output ?

[mtnbikerva1]

I am new to the bikes and try to learn about all the information provided, and how best to use an access at all. Thank you.

 

[mtnbikerva1]

I am writing the new pivot, shuttle AM if it matters.

 

[Mockcyto]

I am writing the new pivot, shuttle AM if it matters.

I run a Garmin 530 and a Fenix 6X and they both overstate watts because they can't talk to the ebike.

2024 Shuttle AM with the Bosch motor will not let Wahoo or Garmin or anyone have access to the stats. My understanding is the Flow App shows the watts we put down, The Garmin/Strava etc show the combined watts.

I'm very weak and averaging 135watts in Flow. the Flow app will show cadence also. You can add the Kiox 300 display and see cadence while riding or using the Flow App.

 

[Peaky Rider]

Similar question to the OP but rather than the Flow App, which I don't bother with, I am looking at the Bosch Kiox display. On the display, if you scroll through you come across a box headed ''power' giving readings in 'watts'. Is this reading for the output of the motor, the rider, or both?

 

[Mockcyto]

Similar question to the OP but rather than the Flow App, which I don't bother with, I am looking at the Bosch Kiox display. On the display, if you scroll through you come across a box headed ''power' giving readings in 'watts'. Is this reading for the output of the motor, the rider, or both?

The Kiox display looks just like the flow app screen, so give your phone a try to see if that's what you are looking for. It has that same ramped power display where it shows the motor watts and your watts and total watts graphically as you ride. Then if you like that data you can add the Kiox display so you don't have to use your phone

 

[Mockcyto]

Similar question to the OP but rather than the Flow App, which I don't bother with, I am looking at the Bosch Kiox display. On the display, if you scroll through you come across a box headed ''power' giving readings in 'watts'. Is this reading for the output of the motor, the rider, or both?

at 8:12 it talks about cadence and shows the display and talks about it

 

[Mockcyto]

the new Flow+ subscription will now show you metrics post ride in graph form, if you add a display, not sure if the app will show it post ride as I haven't ridden since applying the new firmware.

 

[robbydobs]

It's the rider.

with the motor off the value displayed varies with your pedaling force

 

[JP-NZ]

I am new to the bikes and try to learn about all the information provided, and how best to use an access at all. Thank you.

I'm unsure. On my last decent ride with a climb (30.1km with 687 metres elevation)
Flow app shows avg power = 220w and avg cadence = 84rpm
Strava shows avg power = 307w

I was always lead to believe its rider and bike power together.