Update 1.1.5.0

[Andrewscube]

Hi
Just got round to having my bike updated to 85nm and the new bike software is 1.1.5.0 and the battery is 1.10.8.0
Can't find any info on what the changes are.

 

[Cb750stu]

I can't find anything about the update you've had done , nothing on the Bosch website, I thought I had the latest 1.1.2.0 motor update and 1.10.0.0 battery software??

 

[Andrewscube]

Took some photos if that helps

 

[Cb750stu]

Ah ok cheers I wonder what differences there are with that update I still can't find much info about it !!

 

[Doomanic]

@Rob Rides EMTB do you have any info on the latest Bosch software updates?

 

[Doomanic]

The Bosch website are still showing the old versions as being current.

Updates and software versions for on-board computers and drives

Retrofitting and keeping your pedelec and on-board computer up-to-date: you can find the current software versions and updates for Bosch eBike systems here.

www.bosch-ebike.com

 

[Markwright1983]

Found this elsewhere

 

[Doomanic]

I asked on the Bosch eBike FB page on Thursday but haven’t had a response. Pretty poor really.

 

[Rob Rides EMTB]

@Rob Rides EMTB do you have any info on the latest Bosch software updates?

Sorry no idea

 

[Trekster]

Update 1.1.5 is listed on the Bosch update site:

Software updates

Get service information about Software updates for Bosch eBike Systems.

www.bosch-ebike.com

 

[MsO]

Just had new update done left speed box on the bike didn't show any errors

 

[Andrewscube]

Let us know if you get any errors.
I removed my speed box before the update because I had the dreaded 504 error. I have only done 2 small rides to check there was no underlying issues. going to rogate b1ke park so don't need it tomorrow, was thinking if all is well after tomorrow I could refit it.

 

[MsO]

I got a 504 yesterday first time having an error on a gen 4 motor that was on my new focus Sam2 at 400 miles had one fitted on my rail7 over 1300 miles no problems and on my cube stereo 160 that my brother has over 1000 miles no problems with that bike either. When the error came up i was in turbo mode normally only run it in emtb mode that was with firmware 1.1.2 the error went away after about 45 minutes of cycling but the funny thing is after having the update done there are no errors showing in the report

 

[Andrewscube]

Hi I was running the early 1.0.2.0 firmware I did the ride it in limp mode mine took 90min to reset. So I asked at my lbs and they said £35. To update it and I think I was one of the first with this new update. I have been a bit worried about the new manipulation detection. So have been waiting to see if there is any problems with refitting the speed box.

 

[MsO]

I'm gonna email speed box to see if it still works with new update but I heard the 1.1.2 firmware was coming up with error 504 on bikes that wasn't deristricted so they came up with version 1 1.3 to sort that out but my report said no errors showing on my bike was yours the same

 

[Gyre]

Found this elsewhere

View attachment 56898

Powerpack? Is this the battery firmware? Let me guess - another update that only a dealer can perform?

 

[MsO]

Yes dealer upgrade done mine due to the 504 error it's a drive unit upgrade

 

[Andrewscube]

My lbs didn't report any errors, when I picked it up they were really busy they just said that it was the first time it had been connected to bosch